Overview
The Baer Brakes 6920957 is a one-piece replacement rotor with a plain friction surface, measuring 15.000 inch in outside diameter, for the right side of select Baer Brake systems. Replacement brake rotors give the pads a fresh clamping surface, and this one is a vented, full cast iron disc with six stud holes on a 5.50 inch bolt circle. It is sold as each.
Plain finish means the friction face has no slots, leaving a smooth surface. The casting uses a curved vane design for cooling and is dynamic balanced for vibration-free running. Its directional pattern marks it as a right-side rotor, so it is not interchangeable with the left side. No vehicle is named for this part in the manufacturer data, so check the Baer system and bolt pattern before ordering.
Key features
- Plain friction surface with no slots
- Curved vane design for cooling
- Dynamic balanced for smooth running
- One-piece, full cast construction in cast iron
- Directional, right-side rotor with Performance grade type
- Emission code 6 and no drum in hat
Plain versus slotted faces
A plain friction face is the simplest surface a rotor can have. Without slots, there are no channels to carry away dust or gas, so the pad contact area stays smooth and even. Many drivers pick plain rotors for street use, where pad material and bedding procedure matter more than surface channels.
Pad choice goes hand in hand with the rotor. Use a pad rated for the way the vehicle is driven, and bed the new pads and rotor together by making a series of moderate stops before any hard braking. Keep the friction surface free of oil and brake cleaner residue, since contamination can cause judder and reduced bite under load.
- Match pad compound to your driving style
- Wipe the friction face clean before installing pads
- Keep track of the ABS tone ring if your hub uses one
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920957 |
| UPC | 844165037385 |
| Rotor type | One-piece, full cast, vented |
| Side | Right (axle: Right) |
| Surface type | Plain |
| Brake surface | Directional |
| Outside diameter | 15.000 inch |
| Nominal thickness | 1.180 inch |
| Overall height | 2.177 in |
| Center hole diameter | 3.094 inch |
| Stud/lug hole quantity | 6 |
| Stud/lug hole circle diameter | 5.50 inch |
| Material | Cast iron |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Drum in hat | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The rotor is designed for select Baer Brake systems. Its match depends on the Baer hub and caliper setup it was built for.
Confirm your vehicle’s year, model and trim before ordering. Compare the six-hole, 5.50 inch pattern with your hub and the Baer specifications before fitting.
Installation notes
Because the rotor is directional, it belongs on the right side only. The ABS tone ring is not included with this rotor. Brake components are safety critical, so a qualified technician should check the mounting and runout before the vehicle returns to the road.
What’s included
One replacement brake rotor with a plain finish, sold as each.
Not included: ABS tone ring and the left-side rotor, which is sold individually.
