Overview
Baer Brakes part 6910201 is a 1-piece short hat rotor for the left side of select Baer Brake systems, with a slotted finish. The rotor has an 11.350 inch outside diameter, a 0.810 inch nominal thickness and a 1.988 inch overall height.
It is a vented, cast iron, directional rotor with five stud/lug holes on a 4.75 inch bolt circle and a 2.780 inch register. Its finish is slotted only, with no drilling or zinc plating, and no drum is built into the hat. Confirm fit for your vehicle before ordering.
Key features
- Slotted surface finish only.
- Short hat with 1-piece full cast construction.
- Curved vane design intended for cooling.
- Directional brake surface, left side.
- Dynamic balanced for vibration-free performance.
- Five stud/lug holes on a 4.75 inch bolt circle.
- Performance grade with emission code 6.
Slotted rotor upkeep
Slotted rotors are often chosen for their ability to clear pad residue and gas, which helps keep the pad face cleaner during repeated stops. Over time, slots can collect dust and grit, so a periodic look with a flashlight is worthwhile. Clean the slots with a stiff brush when the wheel is off.
Slot edges are the most common place for fine cracking to start, especially after heavy braking or water crossings followed by hard use. Replace a slotted rotor that shows cracks running into the friction surface. Pair the rotor with pads suited to slotted surfaces to limit noise and rapid pad wear.
- Brush slots clean during pad changes
- Look for cracks running from slot edges
- Use pads suited to slotted surfaces
- Replace rotors with deep cracks
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910201 |
| UPC | 90127960981 |
| Surface finish | Slotted |
| Hat style | Short hat |
| Drum in hat | No |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Rotor type | Vented |
| Brake surface | Directional |
| Axle side | Left |
| Outside diameter | 11.350 inch |
| Nominal thickness | 0.810 inch |
| Overall height | 1.988 inch |
| Register | 2.780 inch |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.75 inch |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
The rotor is made for select Baer Brake systems on the left axle side. Confirm fit for your vehicle’s year, model and trim before ordering, including the 5 x 4.75 inch bolt pattern and 2.780 inch register.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that the hub register is 2.780 inch before the rotor goes on. Mark the left side during handling so it is not mixed with the right side. Test the brakes in a safe area before returning the vehicle to normal use.
What’s included
One left-side, 1-piece short hat slotted replacement rotor, sold as each.
Not included: the right-side rotor.
