Overview
The Baer Brakes 54154-020 is a front set of Claw performance rotors for the 2007–2014 Ford Edge and the 2007–2015 Lincoln MKX, fitted to vehicles that use a 12.6 in diameter vented front rotor. Each one-piece, full-cast rotor is a direct replacement with a cross-drilled and slotted friction surface that lets gases and dust escape from between the pad and rotor during braking.
The slotted and cross-drilled face channels gases and dust away from the pad and rotor during braking. The design is built to support a more consistent pedal feel and reduced brake fade. The zinc-plated finish gives a bright look behind open-center wheels. The vane structure is designed for cooling and durability. The cast iron rotors are sold as a pair. Drive type and model year matter when choosing this part, so confirm both before ordering.
Key features
- Slotted and cross-drilled surface that channels gases and dust out from the pad and rotor interface
- Vane structure described by Baer as improved for cooling and durability
- Chamfered cross-drilled holes to help reduce stress cracking
- Zinc-plated finish for a bright look behind open-center wheels
- Premium grade, mill-balanced direct replacement rotor
- Vented, one-piece full-cast construction with a directional brake surface
Pads and fitting
Pad material should suit the rotor surface. Cross-drilled and slotted faces can be harder on softer pads, so match the pad compound to daily driving rather than to the appearance of the rotor. New pads should be bedded in with several moderate stops before any sustained heavy braking.
Front rotors on crossover vehicles carry a lot of the stopping load, so the hub, wheel bearing and caliper slide pins are worth checking while the rotors are off. Clean the hub face thoroughly, apply a thin layer of anti-seize only where the hub meets the rotor, and check that the wheel nuts are tightened in a star pattern.
- Look for scoring, heat spots or a raised lip on the friction face
- Replace rotors that have worn below the minimum thickness stamped on the hat
- Inspect caliper slide pins and boots when pads are changed
- Confirm the rotation direction on each side before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 54154-020 |
| UPC | 844165045793 |
| Axle position | Front |
| Rotor type | Vented, one-piece, full cast |
| Surface type | Slotted and cross-drilled |
| Brake surface | Directional |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Grade | Premium |
| Stud/lug hole quantity | 5 |
| Mounting bolt hole circle diameter | 114 |
| Outside diameter | 320 |
| Overall height | 48.2 |
| Discard thickness | 26 |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | CN |
| Sold as | Set |
Vehicle fitment
Fitment covers the front position of these vehicles:
- 2007–2014 Ford Edge, with AWD or FWD drive and a 12.6 in vented front rotor
- 2007–2015 Lincoln MKX, with AWD or FWD drive and a 12.6 in vented front rotor
The title excludes 2007–2009 front-wheel-drive models, which the fitment entries do not clearly separate, so check drive type closely. The 2015 Ford Edge is not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the brake surface is directional, confirm the rotation direction for each side before mounting. This set has no ABS tone ring, so the existing ring on the vehicle stays in use.
What’s included
A pair of direct replacement front rotors, sold as a set.
Not included: Pads and hub hardware are needed separately.
