Overview
The Baer Brakes 6929222 is a right-side, two-piece replacement rotor ring with a slotted surface. It measures 14.95 inch outside diameter and 1.33 inch nominal thickness and has 12 mounting holes on an 8.50 inch bolt circle. Use part number 6929222 to confirm the ring is the one you need.
This rotor ring is vented, made of cast iron and rated as a performance grade by Baer Brakes. It is directional and built for the right side only. Rotor rings are sold individually, so buy one for each side that needs replacing.
Key features
- Two-piece rotor ring design
- Slotted surface with no drilling or zinc plating
- Vented with curved vanes that aid cooling
- Balanced dynamically to limit vibration
- Purpose-built castings of premium material
- Directional right-side design, no ABS tone ring included
- Resists distortion for steady rotor stability
Choosing a two-piece setup
Two-piece rotor rings are typically chosen when a shop wants to replace only the friction ring and keep a sound hat. Before buying, confirm the mounting pattern, the hat style and the wheel clearance, since those decide whether the ring can be used on the existing setup. Plan to check runout once the assembly is installed, because a ring that runs out will produce pulsation even when it is new.
Slotted rings clear gas and dust during braking, and they can wear pads faster than plain rings if the pad compound is too hard. Keep the friction surface clean, avoid dragging brakes after long descents, and inspect the slot edges for cracking or lipping. Worn rings should be measured against the minimum thickness and replaced once they fall below it, rather than run until the pedal feel changes.
- Confirm mounting pattern and hat style before ordering
- Check ring runout after assembly
- Match pad compound to a slotted ring
- Inspect slot edges during routine service
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929222 |
| UPC | 90127962398 |
| Construction | Two piece |
| Side | Right |
| Brake surface | Directional |
| Solid or vented | Vented |
| Surface type | Slotted |
| Material | Cast iron |
| Grade type | Performance |
| Outside diameter | 14.95 inch |
| Nominal thickness | 1.33 inch |
| Mounting bolt holes | 12 on an 8.50 inch bolt circle |
| ABS tone ring included | No |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
Compare the 12 x 8.50 inch mounting pattern against your current setup, since this ring is intended for select Baer Brake systems. Verify the rest of your setup before installing.
Compare the ring and hat with your vehicle’s year, model and trim before buying.
Installation notes
The ring is right-side only, so confirm the side before fitting. Because it is a two-piece design, a separate hat or hub is needed to hold it, and that hub should be checked for compatibility. Brake work is safety-critical, so use a qualified technician.
What’s included
One right-side two-piece rotor ring, sold individually.
Not included: The hat or hub that holds the rotor ring is a separate part.
