Overview
The Baer Brakes Big Claw 2301044 is a front disc brake rotor kit for 1999-2004 Chevrolet Silverado 1500 and GMC Sierra 1500 trucks, 2000-2006 Chevrolet Suburban 1500, Chevrolet Tahoe, GMC Yukon and GMC Yukon XL 1500 SUVs, and 2002-2006 Cadillac Escalade models. Each kit gives you a pair of larger-than-stock diameter rotors and a pair of caliper relocation brackets that move the calipers outward, so the bigger rotors clear while the OE pads and hardware still fit.
Big Claw kits are aimed at drivers who want stronger stopping power than stock without paying for a full replacement system. Baer reports up to a 49 percent gain in braking effectiveness from independent third-party testing, which it ties to the extra torque and leverage of the larger rotors, and up to a 200-degree lower rotor temperature than OE in extreme conditions, helped by the curved vane design.
Key features
- Rotors up to 2 inches larger than stock on some applications, adding brake torque and leverage
- One-piece, full cast rotor with purpose-cast directional vanes that move air across the rotor for cooling
- Slotted and drilled friction surface that helps vent dust and gases for a steadier pedal feel
- OE-style caliper relocation brackets that keep OE pad and hardware compatibility
- Bolt-on design that needs no brake bleeding
- Zinc-plated finish that resists rust and corrosion and looks clean behind open-spoke wheels
Before you buy
Bigger rotors change more than stopping force. A larger diameter increases the leverage the caliper works against, so the pedal can feel firmer and the brake system runs at different temperatures than the factory setup. Drivers who tow or descend long grades often notice this most. Wheel clearance is the first thing to check, because larger rotors reduce room between the rotor and the inside of the wheel, especially on spoke and deep-dish designs.
Pads, fluid and calipers matter too. A kit that keeps OE pads and hardware still needs pads matched to the rotor face, and old pads should be inspected for glazing or uneven wear before reuse. Brake fluid should be fresh, since heavier use raises temperatures. After installation, bed the pads in gradually before hard stops.
- Measure wheel clearance with the template before mounting
- Inspect caliper slides and pad hardware for wear
- Replace brake fluid if it is old or dark
- Torque lug nuts in a star pattern and recheck after the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2301044 |
| UPC | 844165004271 |
| Package | Set |
| Axle | Front |
| Drive | 2WD, 4WD |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Vented, conventional, floating |
| Surface | Slotted and drilled, directional |
| Vane design | Curved |
| Finish | Zinc plated, rust resistant coating |
| Outside diameter | 14 |
| Nominal thickness | 1.15 |
| Discard thickness | 1.071 |
| Overall height | 2.309 |
| Center hole diameter | 3.095 |
| Mounting bolt hole circle diameter | 5.5 |
| Mounting bolt hole diameter | 0.689 |
| Mounting bolt holes | 6 |
| ABS tone ring included | No |
| Grade | Performance |
| Warranty | Limited 1 Year Warranty |
| Country of origin | US |
Vehicle fitment
The kit fits the front position on these vehicles:
- 2002-2006 Cadillac Escalade
- 1999-2004 Chevrolet Silverado 1500 (Hybrid, LS, LT, SS, WT, Z71)
- 2000-2006 Chevrolet Suburban 1500 (LS, LT, LTZ, Z71)
- 2000-2006 Chevrolet Tahoe (LS, LT, Limited, Z71)
- 1999-2004 GMC Sierra 1500 (C3, Denali, HT, SL, SLE, SLT, WT)
- 2002-2006 GMC Yukon (Denali, SL, SLE, SLT)
Not covered: 2007 and newer GM 1500 trucks and SUVs, and 2005-2006 Silverado and Sierra 1500 models, which are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The Big Claw is a bolt-on system that requires no brake bleeding. Wheel clearance varies by wheel style, so hold the template against each wheel you plan to run, including the spare, before the rotors go on.
What’s included
A pair of larger-than-stock rotors and a pair of new caliper relocation brackets.
Not included: brake pads, since the kit is built to keep OE pads and hardware in use.















