Overview
The Baer Brakes 6910551 is a left-side, 14-inch slotted two-piece replacement brake rotor for select Baer Brake systems. It is a vented cast iron rotor with 12 bolt holes on a 9.90-inch bolt hole circle, and it is made for the left position only.
The Baer Brakes 6910551 has a Performance grade, a directional brake surface and a 1.025-inch nominal thickness. Because the rotor is directional and specific to one side of the vehicle, the left-side part must be matched to the left position. No vehicle years, makes or models are given for this part.
Key features
- Purpose-built cast iron casting from Baer Brakes
- Curved vane design for cooling
- Engineered for rotor stability and resistance to distortion
- Dynamic balanced for vibration-free running
- Slotted braking surface with a directional design for the left side
Before you buy
A brake rotor is one part of a system that includes pads, calipers, hub and bearings, so the rotor should be chosen with the whole assembly in mind. Directional rotors are made for one side of the vehicle, and mounting one on the wrong side can change how the vented vanes move air and how the braking surface meets the pads. Start by confirming which side the rotor belongs on, then match the bolt pattern, bolt circle and hub face before buying.
Vented cast iron rotors are common on heavier vehicles because the vanes help move heat away from the friction surface. Pads, calipers and the ABS tone ring often need checking at the same time, since a worn pad or a seized caliper can wear a new rotor unevenly. Plan to replace pads when you replace the rotor, and inspect the hub for rust or damage before it goes on.
- Confirm left or right side before opening the box
- Check hub face and bolt pattern against the rotor
- Inspect pads, calipers and tone ring at the same time
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910551 |
| UPC | 90127961179 |
| Axle position | Left |
| Outside diameter | 14.000 inches |
| Nominal thickness | 1.025 inches |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 9.90 inches |
| Construction | Two piece |
| Brake surface | Directional |
| Rotor type | Vented |
| Surface type | Slotted |
| Material | Cast iron |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made for select Baer Brake systems and is left-side only.
Before ordering, confirm the year, model and trim that match your vehicle, and check the 12-hole pattern on a 9.90-inch circle against your hub.
Installation notes
The rotor is directional and specific to the left side, so confirm the side before mounting. Check that the 12-hole pattern on a 9.90-inch circle matches your hub before installation.
What’s included
One left-side, two-piece slotted replacement brake rotor ring, part number 6910551.
Not included: ABS tone ring.
