Overview
The Baer Brakes 6920073 is a plain-surface, right-hand, 1-piece tall hat replacement brake rotor. It measures 13.000 inch in diameter and 1.100 inch in nominal thickness, with five studs on a 4.50 inch circle and a 2.781 inch center hole. It is made for specific Baer Brake systems.
A plain friction face has no slots and no drilled holes. Being directional, it belongs only on the right-hand hub. Its emission code is 6 and its overall height is 2.232 inch, both useful when comparing it against an existing rotor.
Key features
- Plain friction surface on a vented rotor
- Right-hand directional design
- Full cast, one-piece construction
- Curved vane pattern for cooling
- Dynamic balancing for vibration-free performance
- Cast iron body with a Performance grade type
- 2.232 inch overall height and 2.781 inch center hole
Choosing between plain and slotted
A plain rotor suits drivers who want a continuous friction face with no slot edges to inspect. The surface is simpler to clean and does not trap debris in cuts. Plain faces depend on good pad bedding and steady heat management, so the pad compound and driving habits shape how the brakes feel more than the surface pattern does.
When choosing between plain and slotted rotors, consider the pads, the vehicle’s weight and the kind of driving done most. Replacing rotors and pads together gives the most even result. Rotors are often replaced in pairs, since uneven wear on one side can cause pedal pulsation and pull under braking.
- Match the pad compound to the rotor surface
- Replace rotors and pads together when possible
- Clean the friction face before first use
- Check hub runout before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920073 |
| UPC | 844165035862 |
| Axle side | Right |
| Surface type | Plain |
| Solid or vented | Vented |
| Brake surface | Directional |
| Construction | Full cast, one piece |
| Material | Cast iron |
| Grade type | Performance |
| Emission code | 6 |
| Outside diameter | 13.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.232 inch |
| Center hole diameter | 2.781 inch |
| Stud/lug hole circle diameter | 4.50 inch |
| Stud/lug hole quantity | 5 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
It is built for specific Baer Brake systems. Measure the 5 x 4.50 inch bolt pattern, 2.781 inch center bore and 13.000 inch diameter against your hub, and confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Make sure the right-hand side is correct before mounting, because the directional design cannot be used on the left. This rotor does not come with an ABS tone ring, so keep the existing ring in place. Test braking gently at low speed before highway use.
What’s included
One right-side plain replacement rotor, sold as each.
Not included: This package does not contain pads, calipers, a hub or an ABS tone ring.
