Overview
The Baer Brakes Claw Performance Rotors, part number 901930-020, are rear vented brake rotors for the 2022–2024 Toyota Tundra and the 2024–2025 Toyota Tacoma TRD Pro. Each one is a conventional, one-piece full cast direct replacement rotor, and the kit is sold as a set.
Baer Claw rotors are built for owners who want better braking and a sharper look behind the wheel. The friction surface is both slotted and cross-drilled, which lets gases and dust escape from between the pad and rotor during braking. The design supports a more consistent pedal feel and reduced brake fade, while the zinc-plated finish gives a bright appearance in open-center wheels.
Key features
- Slotted and drilled friction surface lets gases and dust escape from between the pad and rotor for improved braking and a more consistent pedal.
- Premium, mill balanced, direct replacement rotor.
- Chamfered cross-drilled holes are designed to minimize stress cracking.
- Zinc-plated finish gives a brilliant appearance in open-center wheels.
- Vented, directional brake surface with a rust resistant coating.
- Full cast, one-piece construction in cast iron.
Rear rotor replacement tips
Rear rotors work with the pads, calipers and hub to slow the wheel each time you brake. When a rotor is replaced, the friction surface should be clean and free of oil or brake fluid before the new pads are seated. Bedding in the pads and rotors gradually helps the surfaces transfer an even layer of friction material, which supports consistent pedal feel from the first stop.
Slotted and cross-drilled surfaces move gas and debris away from the contact area, but they can also wear pads differently than a plain surface. Choose a pad that suits your driving, whether highway use, towing or mixed trail use, and pair the pad compound with the rotor surface rather than mixing aggressive and mild components.
Check the rotors at each pad change. Look for deep grooves, heat spots, cracks around the holes, or a raised lip at the outer edge. Pulsing through the pedal can point to uneven thickness. Tighten the wheel bolts to the vehicle’s specification in a star pattern, and re-check them after the first few stops.
- Clean the hub face before mounting the new rotor
- Check that the ABS tone ring is still in place, since it is not included
- Inspect the caliper slide pins whenever the rotors are changed
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 901930-020 |
| UPC | 90127971253 |
| Sold as | Set |
| Country of origin | USA |
| Axle | Rear |
| Rotor type | Conventional |
| Construction | One piece, full cast |
| Solid or vented | Vented |
| Surface type | Slotted x drilled |
| Brake surface | Directional |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Rust resistant coating | Yes |
| Grade type | Premium |
| Outside diameter | 334.8 mm (13.181 in) |
| Nominal thickness | 20 mm (.787 in) |
| Discard thickness | 18.6 mm (.732 in) |
| Overall height | 58.4 mm (2.299 in) |
| Center hole diameter | 97 mm (3.819 in) |
| Stud/lug hole circle diameter | 5.5 |
| Stud/lug hole quantity | 6 |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
These rotors fit the 2022–2024 Toyota Tundra and the 2024–2025 Toyota Tacoma in the TRD Pro trim. The center bore and the 6-lug, 5.5 bolt pattern must match the hub you are replacing.
Other Tacoma trims and Tundra model years outside 2022–2024 are not covered by this fit. Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of direct replacement rotors, sold as a set.
Not included: ABS tone ring.
