Overview
The Baer Brakes 6921142 is a right-side, 1-piece slotted replacement brake rotor sold individually. It measures 13.000 inch in outside diameter and 0.81 inch in nominal thickness, is vented, and has a 5 x 5.50 inch lug pattern. It is made for select Baer Brake systems and is directional, so it is built for the right side only.
The cast iron body uses a curved vane design that aids cooling, and the rotor is dynamically balanced for smooth running. The design resists distortion and holds its shape under heat. The center hole is 3 inch and the overall height is 3 inch.
Key features
- Slotted surface with no drilled holes
- Curved vane design, which Baer describes as aiding cooling
- Directional right-side rotor
- One-piece full cast construction in cast iron
- Dynamically balanced for smooth running
- Drum-in-hat design
Choosing slotted rotors
Slots on a brake rotor help clear dust, water and debris from the pad contact area. They also give the pads a fresh edge as they wear, which can help with pad bite in varied conditions. A slotted face works best when paired with pads designed for it, since aggressive pad compounds can wear faster on the slot edges.
When replacing a slotted rotor, look at the whole braking system. Calipers, pad hardware and brake lines should be checked at the same time. Clean the hub face and register before mounting, and keep the friction surfaces free of oil or grease during installation.
- Check slot edges for cracks and raised lips
- Keep friction surfaces free of oil and grease
- Pair with pads designed for slotted faces
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6921142 |
| UPC | 90127962176 |
| Sold as | Each |
| Country of origin | USA |
| Axle side | Right |
| Rotor type | Vented, 1-piece full cast |
| Outside diameter | 13.000 inch |
| Nominal thickness | 0.81 inch |
| Overall height | 3 inch |
| Center hole diameter | 3 inch |
| Stud/lug hole circle diameter | 5.50 inch |
| Stud/lug hole quantity | 5 |
| Surface type | Slotted |
| Brake surface | Directional |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Emission code | 6 |
Vehicle fitment
Its intended use is select Baer Brake systems. Before fitting, check the axle side, 5 x 5.50 inch bolt pattern, 3 inch center hole and 13.000 inch diameter against your brake system and vehicle.
This slotted right-side rotor does not replace a left-side unit. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional, confirm it is going on the right side before fitting it. Seat the 3 inch center hole on the hub and make sure the 5 x 5.50 inch lug pattern lines up with the studs. Work on a supported vehicle and follow the brake system procedure for the pads and calipers.
What’s included
One right-side slotted replacement rotor, sold individually.
Not included: ABS tone ring; this rotor does not include one.
