Overview
The Baer Brakes 6920183 is a right-hand, two-piece replacement brake rotor with a slotted friction surface, measuring 11.625 inch outside diameter by .705 inch nominal thickness. It is used in certain Baer SS4 Plus Deep Stage systems and other Baer brake systems, so those kits are the natural match for it.
Shops and owners working on a Baer right-side brake will find the key dimensions in the specifications: 12 mounting holes on a 7.50 inch bolt circle and a vented cast iron ring. The rotor is directional, so it is made for the right side only and cannot be swapped across the axle.
Key features
- Two-piece design built around a cast iron ring
- Slotted finish on the friction surface
- Curved vane layout that Baer Brakes links to optimum cooling
- Dynamic balanced for smooth, vibration-free running
- Directional surface marked for the right side
- Made from premium materials as a purpose-built casting
Matching the rotor to the hub
The hub face and the rotor’s mounting holes have to line up exactly, or the rotor will run out and cause pulsation in the pedal. Before installing, clean rust and debris from the hub face and wheel studs, and check that the rotor sits flat against it. A slotted surface helps clear pad debris and water, which is useful when brakes see wet or dusty use, but the slots also add wear to the pad face over time.
Directional rotors are marked for one side, and the marking should face the direction the design expects. Mixing sides can reduce cooling and braking consistency. Two-piece rotors also rely on the hat and ring being seated correctly, so check fasteners after the first few short drives.
- Clean the hub face before fitting
- Check the directional marking
- Re-check fasteners after initial use
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920183 |
| UPC | 90127961810 |
| Axle side | Right |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Material | Cast iron |
| Outside diameter | 11.625 inch |
| Nominal thickness | .705 inch |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 7.50 inch |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is used in certain Baer SS4 Plus Deep Stage systems and other Baer brake systems. Before ordering, confirm the year, model and trim match your vehicle.
Confirm your vehicle’s year, model and trim before ordering. Measure your existing rotor against the 11.625 inch diameter and .705 inch thickness before fitting.
Installation notes
Directional rotors go on one side only, so the right-hand unit cannot be installed on the left. No ABS tone ring comes with this rotor, so any ring the hub uses must be obtained separately.
What’s included
One right-hand replacement rotor ring, supplied as each.
Not included: brake pads, calipers, hub hardware and an ABS tone ring.
