Overview
The Baer Brakes 6929496 is a right-side, tall hat, one-piece replacement rotor measuring 13.000 inches in diameter and 1.100 inches thick. Its surface is slotted, drilled and zinc-plated, and the listed rotor hat ID is 6.410 inches.
It fits certain Baer Track4, SS4 and other Baer Brake systems. It is directional and side-specific, sold individually, and carries no integrated drum. Confirm the diameter, bolt pattern and hat ID against your hub before ordering.
Key features
- Slotted, drilled and zinc-plated surface
- Tall hat design with a 6.410 inch rotor hat ID
- One-piece full cast cast iron construction
- Curved vane design for cooling
- Dynamically balanced for smooth operation
- Vented, directional, Performance grade
- Engineered for stability and resistance to distortion
Tall hat rotors and clearance
A tall hat moves the friction surface further from the hub, which changes how the rotor sits against the caliper and the wheel. Before installing a tall hat rotor, check that the caliper bracket, pads and inner wheel face have enough room. Bolting a rotor on with the wrong offset or hub spacing can leave the friction surface rubbing the pads or the wheel barrel.
Hub register fit is the main concern with tall hat designs. A rotor that seats on the register sits square to the hub and runs true, while a loose fit can cause runout that shows up as pulsing. Wipe the hub face clean and check for rust rings before mounting, and make sure the wheel lug holes line up without forcing.
- Check caliper clearance over the hat
- Measure the hub register before mounting
- Inspect the wheel bearing for play
- Keep the hub face flat and free of rust
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929496 |
| UPC | 90127962497 |
| Outside diameter | 13.000 inches |
| Nominal thickness | 1.100 inches |
| Overall height | 2.232 inches |
| Rotor hat ID | 6.410 inches |
| Stud/lug bolt pattern | 5 studs on a 5.00 inch circle |
| Stud/lug hole quantity | 5 |
| Axle side | Right |
| Construction | One-piece, full cast |
| Rotor type | Vented, directional |
| Surface | Slotted, drilled and zinc-plated |
| Material | Cast iron |
| Grade | Performance |
| Drum in hat | No |
| ABS tone ring | Not included |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
Baer describes part 6929496 for certain Baer Track4, SS4 and other Baer Brake systems, with no make, model or year named. Measure your hub and confirm the 5 x 5.00 inch bolt pattern and 6.410 inch hat ID before buying.
Plain and slotted tall hat versions with the same dimensions are separate part numbers. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This rotor is directional and side-specific, so it installs on the right hub only. Confirm the 6.410 inch hat ID suits your hub and hardware before final assembly. Brakes are safety-critical, so inspect the finished installation before driving.
What’s included
One right-side tall hat rotor, sold individually.
Not included: ABS tone ring.
