Overview
The Baer Brakes 6920333 is a right-side, 1-piece tall hat replacement brake rotor with a slotted friction face. It measures 12.000 inch across and 1.100 inch thick, and it is made for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering.
Slots cut into the friction face are a common choice for helping clear debris and gas from the pad surface. This rotor pairs that slotted face with a vented, full cast body in cast iron. Its 2.781 inch center hole and 5 x 4.50 inch stud pattern set how it mounts, and its directional design is built for the right side of the vehicle only.
Key features
- Slotted friction face with no drilled holes or zinc-plated finish
- Vented full cast body in cast iron
- Curved vanes designed to move air through the rotor
- Purpose-built castings made from premium materials
- Designed for stability and resistance to distortion
- Dynamic balanced to reduce vibration
- Directional design for the right side
Pads and slotted faces
A slotted friction face works with the pad material to manage debris and gas at the contact point. Pads are the consumable part on this side of the brake system, and a slotted rotor can grind them down in a different pattern than a plain disc, so checking pad thickness at the same time as the rotor is worthwhile. Choose pads rated for the driving you do, whether daily commuting, towing or trail use.
Slots gradually shed material from the pad face, so over time the edges of the openings can develop a hooked profile that is visible on the rotor. Light surface marks are normal, but deep grooves that catch a fingernail are a sign the disc should be measured and replaced. Bed in new pads gently after installation with a gentle break-in routine so the friction layer transfers evenly.
- Pads matched to a slotted surface
- Checking pad thickness at the same time as the rotor
- Light surface marks are normal; deep grooves are not
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920333 |
| UPC | 90127961957 |
| Axle side | Right |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.100 inch |
| Overall height | 2.228 |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 inch |
| Center hole diameter | 2.781 inch |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Material | Cast iron |
| Grade type | Performance |
| Drum in hat | No |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
Vehicle fitment
The 6920333 is made for select Baer Brake systems. Match its right-side 12.000 inch diameter, 1.100 inch thickness and 5 x 4.50 inch bolt pattern to your brake hardware before ordering.
Confirm your vehicle’s year, model and trim before ordering. A left-side application needs a separate left-side rotor.
Installation notes
Mount this rotor only on the right side, since the directional design cannot be reversed. Each rotor is sold on its own, so budget for a second part if both sides are being replaced. Because the friction face is slotted, use pads suited to a slotted surface. Test the brakes at low speed before returning to normal driving after any brake work.
What’s included
This is the replacement brake rotor only, sold individually.
Not included: No ABS tone ring comes with this rotor. Confirm the hub hardware your application needs before installation.
