Overview
The Baer Brakes 6920252 is a right-side, 13.500 inch two-piece replacement brake rotor with a slotted, drilled and zinc-plated friction face, made for select Baer Brake systems. It is a vented cast iron disc with a 1.250 inch nominal thickness and 12 mounting bolt holes on an 8.50 inch bolt circle.
The castings are purpose built for this application, and the vane layout is curved to aid cooling. Because the brake surface is directional, the rotor is specific to the right side of the vehicle and a left-side rotor is needed for the other wheel. The rotor is dynamic balanced for vibration free running.
Key features
- Slotted, drilled and zinc-plated surface finish
- Two-piece rotor ring construction
- Curved vane design for cooling
- Directional brake surface for right-side installation
- Dynamically balanced for smooth running
- Designed for rotor stability and resistance to distortion
Before you buy
Brake rotors give the pads a friction surface, and a right-side rotor like this one only works properly when it is mounted on the correct hub. Because the brake surface is directional, check the side orientation and hub fit before the wheel goes back on. Drilled and slotted faces are often chosen for repeated stops, but they can wear pads faster in some driving, so pad choice should match how the vehicle is used.
Two-piece rotors separate the friction ring from the hat, so the hat and ring hardware should be checked for looseness and corrosion at each brake service. Replacing rotors in pairs keeps braking even from side to side. Pads, hardware and fluid are often renewed at the same time, and the hub bearing is worth checking while the rotor is off.
- Inspect the friction surface for cracks and heavy scoring
- Check runout and thickness with a gauge before reinstalling
- Replace pads when they reach their wear limit
- Clean rust from the hub face before mounting
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6920252 |
| UPC | 844165012290 |
| Outside diameter | 13.500 inch |
| Nominal thickness | 1.250 inch |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 8.50 inch |
| Material | Cast iron |
| Construction | Two piece |
| Rotor type | Vented |
| Surface type | Slotted, drilled and zinc plated |
| Brake surface | Directional |
| Axle side | Right |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Unit of sale | Each |
Vehicle fitment
It is offered for select Baer Brake systems. Match the right-side 13.500 inch diameter and 12 x 8.50 inch bolt pattern against your application. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Rotors are directional, so confirm the right side before mounting. The ABS tone ring is not included. Because rotors are safety parts, clean the hub face and verify runout before the drilled and zinc-plated rotor is bolted on.
What’s included
One right-side replacement rotor, unit of sale each.
Not included: ABS tone ring.
