Overview
The Baer Brakes 6919106 is a left-side, one-piece replacement brake rotor with a plain friction surface, sized for the Baer Track4 and SS4 family and other Baer Brake setups. It measures 13.000 inches in outside diameter and 1.100 inches nominal thickness, uses a tall hat design, and has a vented body. Owners who want a plain face rather than a slotted one will look for this part number.
Cast iron and built as a full cast, one-piece unit, this rotor carries a performance grade rating from Baer Brakes. Its curved vane design is intended to improve cooling, and it is dynamically balanced for smooth running. The directional face is made for the left side only, and the rotor is supplied as a single unit.
Key features
- Plain friction surface with no slots or drilling
- Curved vane design intended to improve cooling
- Full cast, one-piece cast iron construction
- Dynamically balanced for smooth running
- Directional design made for the left side only
- Tall hat design with a vented body
Plain faces and pad bedding
A plain friction surface has no slots to clear debris, so the pad face and rotor face work together across the whole contact area. Keep the surface clean and free of oil or grease, since residue on a smooth face can cause uneven pad grip and squeal. Plain faces suit owners who want a straightforward surface with no slot edges to affect the pads.
Bed in new pads on a clear stretch of road using moderate stops, letting the rotor cool between runs. Check the face for a blue or bronze tint, which indicates heat, and look for a ring or groove that could grab the pad. A plain rotor is often installed with new pads so both friction surfaces wear evenly from the start.
- Wipe the face with brake cleaner before fitting
- Inspect the hat and hub mounting surface for corrosion
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919106 |
| UPC | 90127961421 |
| Axle side | Left |
| Surface type | Plain |
| Solid or vented | Vented |
| Brake surface | Directional |
| Outside diameter | 13.000 in |
| Nominal thickness | 1.100 in |
| Overall height | 2.232 in |
| Center hole diameter | 2.781 in |
| Stud/lug hole quantity | 5 |
| Stud/lug hole circle diameter | 4.50 in and 4.750 in |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Drum in hat | No |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
It is made for the Baer Track4 and SS4 family and other Baer Brake setups, so compare the hub and center hole with the specifications above before choosing it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The face is plain, so there are no slots or drilled holes to inspect, but the rotor is still directional and must be the left unit. No ABS tone ring comes with it, so retain any existing ring on the hub. Confirm runout before the vehicle is driven again.
What’s included
A single left-side plain finish rotor.
Not included: brake pads, calipers and mounting hardware.
