Overview
The Baer Brakes 6910261 is a 14-inch, two-piece slotted replacement brake rotor for the left side of select Baer Brake systems. It is a directional, vented cast iron rotor with a 12-bolt pattern on an 8.50-inch bolt circle and a 1.25-inch nominal thickness.
Because this rotor is directional and made for one side only, this left-axle part belongs on the left side of the vehicle. Baer Brakes positions it as a performance-grade replacement, so the outside diameter, thickness and bolt pattern are the dimensions to compare against your current rotor before fitting.
Key features
- Two-piece rotor ring with a slotted friction surface
- Curved vane design for optimum cooling
- Castings made from premium materials
- Dynamic balanced for vibration-free running
- Directional brake surface for left-axle installation
- Vented cast iron construction
- Performance grade.
Signs the rotor is worn
Brake rotors wear through repeated friction, so the braking face slowly loses thickness and flatness over its service life. Common warning signs include pulsing through the pedal under braking, a scored or grooved face, a raised lip at the outer edge, and blue or heat-marked patches. Measure thickness against the minimum stamped on the rotor before deciding whether to replace it, and inspect the pads, calipers and hub at the same time.
A directional vented rotor relies on its vane pattern to move air through the disc, so the side and orientation it is mounted in matter as much as the bolt pattern. Slotted faces help clear gas and debris from the pad surface, but they add edges that can wear pads faster on some setups. Replacing pads together with the rotor helps the new friction surface seat evenly.
- Check hub face runout with a dial indicator before final mounting
- Clean the hub mating surface and remove any rust scale
- Bed in new pads gradually with moderate stops after installation
- Torque lug nuts in a star pattern to the specified value for your vehicle
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6910261 |
| UPC | 90127961032 |
| Axle position | Left |
| Outside diameter | 14 inches |
| Nominal thickness | 1.25 inches |
| Bolt hole quantity | 12 |
| Bolt hole circle diameter | 8.50 inches |
| Construction | Two piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted |
| Material | Cast iron |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Pack quantity | Each |
Vehicle fitment
It is a replacement for select Baer Brake systems. Confirm fit for your vehicle’s year, model and trim before ordering, and check the matching system and caliper setup.
Confirm your vehicle’s year, model and trim before ordering. A right-side rotor will not substitute for this left-axle part.
Installation notes
Fit this rotor only on the left axle, with the directional face oriented as the design intends. Check that the 12-bolt pattern and 8.50-inch bolt circle match the hub before installation. Brake parts are safety-critical, so have the finished installation checked before the vehicle returns to road use.
What’s included
One left-side, two-piece slotted replacement rotor ring, part number 6910261.
Not included: An ABS tone ring is not included.
