Overview
The Baer Brakes 6919098 is a left-side replacement rotor for select Baer Brake systems. It is a one-piece, full cast vented rotor that measures 12.000 inch across and 1.020 inch thick, with a slotted, drilled and zinc-plated friction surface.
Baer built this rotor from cast iron for owners who want a directional replacement with a curved vane design for cooling. Because it is made for the left side only, install it there rather than using a mirror image of the right-side rotor. No year, make, model or chassis code is given for part 6919098, so use the fitment section to check compatibility before you order.
Key features
- Curved vane design intended to help cooling of the vented rotor
- Slotted and drilled face with a zinc-plated finish
- Dynamically balanced for vibration-free operation.
- Full cast, one-piece construction in cast iron
- Designed for rotor stability and resistance to distortion
- Listed with a drum in hat configuration
Before you buy
Brake rotors wear through friction against the pads, and the friction surface usually shows it first. Before ordering a replacement, look at the existing rotor for deep grooves, heat cracking, a raised lip at the outer edge, or uneven thickness across the face. Any of these can cause pulsation or weaker braking, and a worn rotor can wear new pads faster than expected.
Because this rotor is directional and side-specific, confirm which side you are replacing before starting work. Pads, hardware and the ABS tone ring are often checked during the same job, so inspect them while the wheel is off. After installation, bed in new pads with a gradual stop sequence so the friction material transfers evenly.
- Check the hub face and bolt holes for corrosion before mounting.
- Clean the mating surface so the rotor sits flat against the hub.
- Measure old and new rotors side by side when fit is uncertain.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919098 |
| UPC | 844165054467 |
| Side | Left |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Material | Cast iron |
| Outside diameter | 12.000 inch |
| Nominal thickness | 1.020 inch |
| Overall height | 2.406 inch |
| Stud/lug hole circle diameter | 4.75 inch |
| Stud/lug hole quantity | 5 |
| Center hole diameter | 2.810 inch |
| Drum in hat | Yes |
| ABS tone ring included | No |
| Grade type | Performance |
| Emission code | 6 |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This rotor is a replacement for select Baer Brake systems. Measure your current rotor’s outside diameter, thickness, 5 x 4.75 inch bolt pattern and 2.810 inch center hole, then compare those figures before ordering.
Measure your current rotor’s outside diameter, thickness, 5 x 4.75 inch bolt pattern and 2.810 inch center hole, then compare those figures with the specifications above.
Confirm your vehicle’s year, model and trim before ordering. Fitment for any specific vehicle is not confirmed here.
Installation notes
The rotor is directional and side-specific, so mount the left-side part on the left hub only and keep the friction surface orientation as designed. The ABS tone ring is not included, so it must be sourced separately if your system uses one. Brakes are safety equipment, so have the installation checked before driving.
What’s included
Each listing is one left-side rotor, sold individually as each.
Not included: ABS tone ring.
