Overview
The Baer Brakes 6921076 is a right-side replacement brake rotor with an 11.650 inch diameter and .705 inch thickness. It offers five-lug bolt circles listed at 4.50 and 4.75 inches, a 2.780 inch center bore, and a slotted, drilled, zinc-plated friction surface.
The one-piece vented cast iron design includes a drum-in-hat section. It is directional, made for the right side, and is meant to be paired with the matching left-side rotor on the opposite hub. No vehicle application is established for this part number.
Key features
- Right-hub directional design for one side of the vehicle.
- Five-lug pattern shown on either 4.50 or 4.75 inch bolt circles.
- Curved vanes designed to help cooling.
- Dynamic balancing for smoother running.
- Slotted, drilled and zinc-plated friction surface.
- Premium castings with full cast, one-piece construction.
Choosing the right setup
A rotor only performs as well as the hub, caliper and pads it works with. Before buying, measure the bolt circle, center bore and outside diameter, then check that the caliper bracket will clear the rotor thickness. Mismatched hardware can cause vibration or uneven pad contact.
Rotors with a drum-in-hat section depend on a clean, flat mounting surface. Surface rust or debris between the hat and hub can cause runout, so clean the mating faces thoroughly before installation.
Because this rotor is directional, pairing it with the correct side of the vehicle matters for both fit and the intended cooling airflow. Keep the left and right parts separated during handling.
- Confirm the bolt circle before ordering.
- Replace pads when worn rather than running them down on a new rotor.
- Torque the lug nuts in a star pattern after installation.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6921076 |
| UPC | 844165054603 |
| Package quantity | Each |
| Country of origin | USA |
| Axle side | Right |
| Outside diameter | 11.650 inch |
| Nominal thickness | .705 inch |
| Center hole diameter | 2.780 inch |
| Bolt circle diameter | 4.50 inch and 4.75 inch |
| Lug hole quantity | 5 |
| Material | Cast iron |
| Construction | Full cast, one piece |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Slotted, drilled and zinc plated |
| Drum in hat | Yes |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
Vehicle fitment
Match the bolt circle, center bore and 11.650 inch diameter to your hub, and confirm your vehicle’s year, model and trim before choosing it.
The 4.50 and 4.75 inch bolt circles are different hub patterns, so a hub set up for one will not take the other. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor lists two bolt circle diameters, mount it only on a hub that matches the bolt circle you measured. The directional design means the right-side part belongs on the right hub. Brake work should be done by a qualified technician.
What’s included
One right-side rotor, package quantity each.
Not included: the left-side partner rotor, which is a separate item.
