Overview
The Baer Brakes 05569-020 is a set of two front Claw performance rotors for 1988–1991 GMC K1500 4WD trucks and for the GM trucks and SUVs shown below. The rotors are one-piece, full cast, vented direct replacements for the factory front rotor, and they are cross-drilled and slotted.
The slots and drilled holes in the friction surface let gases and dust escape from between the pad and rotor during braking. This supports a more consistent pedal and less brake fade. Each rotor has a zinc plated finish that shows through open-center wheels, and the vane structure is designed for cooling.
Key features
- Cross-drilled and slotted friction surface that vents gases and dust between pad and rotor
- Enhanced vane structure for cooling and durability
- Premium, mill balanced direct replacement rotor
- Chamfered cross-drilled holes to help minimize stress cracking
- Zinc-plated finish for open-center wheels
- One-piece full cast, vented construction
Before you buy
Cross-drilled and slotted rotors work by letting heat, gas and dust leave the pad face. Under hard braking, pad material can gas off and fill the space between pad and rotor, so the openings help keep that contact steady. Used on a truck that tows, descends grades or makes frequent stops, this kind of rotor is most useful when the pads are matched to the rotor face.
Choosing the rest of the front brake setup matters as much as the rotor. Pads, calipers and brake lines are often replaced at the same time, and new pads should be bedded in before heavy use. Check that the hub face is clean and that the ABS tone ring already in place is reused, since this kit does not include one.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 05569-020 |
| UPC | 844165000136 |
| Axle | Front |
| Sold as | Set (pair) |
| Construction | One piece, full cast |
| Rotor type | Vented |
| Surface type | Slotted and cross-drilled |
| Brake surface | Directional |
| Material | Cast iron |
| Disc finish | Zinc plated |
| Grade | Premium |
| Drive | 4WD |
| Stud/lug hole quantity | 6 |
| Mounting bolt hole circle diameter | 140 |
| Outside diameter | 294.89 |
| Overall height | 62.74 |
| Discard thickness | 31 |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | CN |
Vehicle fitment
The manufacturer fitment list for this rotor set includes 1999–2000 Cadillac Escalade, 1992–1994 Chevrolet Blazer, 1995–2000 Chevrolet Tahoe, 1988–1991 GMC K1500, 1992–1993 GMC K1500 Suburban, 1994–1999 GMC K2500 Suburban and 1992–2000 GMC Yukon. Some listings carry qualifiers on rear drum size, chassis type or front rotor thickness, so compare them with your truck.
Ford, Toyota and other non-GM models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
What’s included
A pair of front rotors, sold as a set.
Not included: an ABS tone ring.
