Overview
The Baer Brakes 4262322FR is a Fire Red Deep Stage drag brake kit for Ford 9 inch early big bearing housing ends, using a 5×4.5 and 5×4.75 bolt circle. It belongs to the SS4 Plus range and suits heavy, quick cars that also get street driving.
Two four-piston S4 calipers and 11.0 inch two-piece slotted, drilled rotors make up the braking hardware. Pads are the DR1 or HB100 type, and the kit is built for wheels of 15 inches and up. The axle flange must measure 5.75 inches, so check the housing ends before anything else.
Key features
- Two-piece S4 calipers with four pistons on each side
- Hard anodized aluminum pistons with stainless steel abutments
- Noise suppression clips included with the caliper package
- Slotted, drilled, zinc-plated two-piece rotors with aluminum hats
- Stainless hardware pre-assembled on the rotors
- Powder coated caliper finish
Ford 9 inch axle swaps
Swapping rear brakes on a Ford 9 inch axle means matching the housing end to the brake hardware before anything else. Early big bearing and late big bearing housings use different flange arrangements, so the bearing type and flange size need to be confirmed before the rotors can be mounted.
A rear drag setup also changes how the car stops under load. The rear brakes take a larger share of stopping force during hard braking, so the pads, rotors and hardware see more heat. Brake hoses, lug nuts and the bleeding procedure are typically reviewed at the same time, since a rear caliper change affects the whole rear circuit.
- Identify the housing end type before buying
- Confirm the flange size against the kit requirement
- Plan hoses and lug nuts as part of the swap
- Bleed the rear circuit after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262322FR |
| UPC | 844165038450 |
| Supplied as | Kit |
| Axle position | Rear |
| Axle flange | Ford 9 inch early big bearing |
| Bearing type | Big Bearing |
| Axle flange size required | 5.75 inch |
| Caliper | S4, two-piece, four-piston, fixed |
| Calipers included | 2 |
| Caliper color | Fire Red |
| Piston size | 1.75 inch |
| Rotor outside diameter | 11.0 inch |
| Rotor thickness | 1.02 inch |
| Rotor type | Two-piece, vented, slotted, drilled, zinc-plated |
| Rotor material | Iron with aluminum hat |
| Pad type | DR1 or HB100 (FMSI DR1) |
| Friction material | Semi-metallic |
| Grade | Performance |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 |
| Minimum wheel diameter | 15.0 inch |
| Park brake | No |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
No vehicle list is attached to this kit. The product names a Ford 9 inch rear housing with early big bearing ends, which identifies an axle type rather than a model year, so the kit is not tied to specific years here.
Early big bearing ends are not the Torino/late big bearing type in this family, so match the housing exactly. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The rotors are pre-assembled with stainless hardware and mounting hardware is included, which keeps the rear swap straightforward once the housing ends are verified. Expect to add lug nuts and brake hoses, since neither comes with the kit. A drag-focused setup like this one also calls for a proper bleed and a pedal feel check before any street use.
What’s included
Two S4 calipers, two-piece rotors on aluminum hats, the pre-assembled hardware and the mounting hardware.
Not included: Front rotors, lug nuts and hoses. The kit has no park brake.















