Overview
The Baer Brakes Pro Plus 14.0 Inch rear brake system, part number 4262151B, is a black rear disc brake kit for Ford 9 Inch early big bearing axle housing ends with a 5×4.50/5×4.75 wheel bolt pattern. It combines a 6-piston caliper, a two-piece 14.0 Inch slotted and drilled rotor, and a park brake shoe assembly. The black caliper finish is the visible difference, and the kit suits owners upgrading a Ford 9 Inch rear end who want a larger rotor.
The backing plate mounts the caliper and houses a one-piece park brake shoe assembly, so the parking brake is built into the rear brake hardware. Rotors come pre-assembled with NAS high grade stainless hardware, and stainless braided hoses are included. Wheel fit cannot be guaranteed for every wheel style, so use the Q082P template to check clearance against your wheel.
Key features
- Black powder coated 6P caliper with stainless steel pistons, abutments and noise suppression clips
- Staggered pistons help minimize uneven pad wear
- Dual seals for dust, weather and pressure
- Two-piece slotted, drilled, zinc plated rotor with a billet aluminum hat
- CNC machined forged or billet aluminum components, U.S. sourced
- D0731 pad type (FMSI D0731)
- Stainless braided hoses and hardware included
- Calipers manufactured in Phoenix, Az
Care and inspection
Routine inspection keeps a rear disc setup safe between installs. Look at the pad thickness through the caliper window, check the rotor face for deep grooves or blue heat marks, and feel for pulsation in the pedal under light braking. A rotor that has been overheated can warp, and a warped rotor usually shows up as a shudder rather than a noise. Keep the braided hoses free of rubbing and check the fittings for seepage at the same time.
Black calipers hide dust and brake residue well, but the powder coat still needs gentle cleaning. Use a mild, non-abrasive cleaner and avoid strong solvents that can soften the finish. When the park brake is used regularly, cycle it at low speed on a safe surface so the shoe does not stick. Since cables are sourced separately, inspect them for stretch or fraying every season and replace worn ones promptly.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262151B |
| UPC | 844165022015 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Rotor diameter | 14.0 Inch |
| Rotor type | 2-Piece |
| Rotor style | Slotted, drilled |
| Rotor surface | Zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.15 |
| Min wheel diameter | 18.0 Inch |
| Wheel bolt pattern | 5×4.50/5×4.75 |
| Lug count | 5 Lug |
| Caliper | 6P, 6-piston, fixed |
| Caliper color | Black |
| Caliper finish | Powder coated |
| Pad type | D0731 (FMSI D0731) |
| Hose material | Steel braided, DOT approved |
| Park brake | Included |
| Park brake cables | Not included |
| Front rotor included | No |
| Lug nuts included | No |
| Template | Q082P |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
It targets Ford 9 Inch early big bearing rear axle housing ends with a 5×4.50/5×4.75 bolt pattern, not a particular year, make, model or trim. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Housings with a different flange type are not covered by this big bearing kit.
Installation notes
The caliper and park brake shoe mount to the same backing plate, so confirm the housing ends match the Ford 9 Inch early big bearing flange before bolting anything on. Park brake cables are not included, so plan to source them separately. Test the park brake and service brakes at low speed before driving.
What’s included
The kit includes the two-piece 14.0 Inch rotors pre-assembled with NAS high grade stainless hardware, the black 6-piston calipers, the backing plates with the park brake shoe assembly, and the stainless braided hoses with hardware.
Not included: front rotor, lug nuts and park brake cables.















