Overview
The Rough Country R/C1094A is a 2-inch aluminum wheel spacer for 8-lug wheels on an 8 on 170 bolt pattern. Spacing the wheel outward from the suspension allows a wider tire to be fitted and gives the truck a more aggressive stance. Fit is set by bolt pattern and stud thread rather than vehicle model, so check both before mounting.
The spacer is made from 6061-T6 aluminum, which the brand describes as corrosion resistant. It is designed for 14mmx1.5 studs.
Key features
- 2-inch thickness to offset the wheel for wider tires
- Built for an 8 on 170 bolt pattern
- 6061-T6 aluminum construction
- Corrosion resistant aluminum construction
- Designed for 14mmx1.5 studs
Spacer fitment checks
A wheel spacer moves the wheel outward on the hub, which changes the wheel’s position relative to the fender and suspension. Thicker spacers add more clearance for wider tires but also put more leverage on the wheel studs. Because the spacer sits between the hub and the wheel, it needs fasteners long enough to engage the threads fully.
Before fitting, confirm the hub is clean and flat so the spacer seats evenly, and check that the lug nuts seat correctly in the spacer’s holes. Recheck lug torque after the first drive and again after the first few days of normal use.
- Use longer studs when the spacer requires it
- Check tire rub at full steering lock
- Inspect the spacer for cracks during tire rotations
Specifications
| Brand | Rough Country |
|---|---|
| Part number | R/C1094A |
| Type | Wheel spacer |
| Thickness | 2 inch |
| Bolt pattern | 8 on 170 |
| Stud size | 14mmx1.5 |
| Material | Aluminum, 6061-T6 |
| Fitment | Universal Fit |
Vehicle fitment
No vehicle is named for this spacer. Because it is marked Universal Fit, check the 8 on 170 bolt pattern and the 14mmx1.5 stud thread against your wheels before fitting. A spacer also changes where the wheel sits, so confirm tire clearance on the vehicle you plan to use it on.
Spacers are matched by bolt pattern and hub, not by model year or trim. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check that your lug nuts or studs match the 14mmx1.5 thread before installing, because a spacer that sits loose on the hub can work its fasteners out. Recheck the lug nut torque after the first drive, and confirm steering and brake hose movement with the spacer in place.
What’s included
The spacer is the only item in this package, with no other hardware included.
Not included: Wheel studs and lug nuts are not included, so plan on hardware that matches the 14mmx1.5 thread.









