Overview
The G2 Axle and Gear 93-70-200 is an 8×170 wheel spacer, 2 inch thick, with a black anodized finish. A wheel spacer sits between the hub and the wheel and moves the wheel outward, which changes the offset and can add clearance for the tire and suspension. The 8×170 hub layout is the first thing to confirm.
Each spacer comes with pre-installed wheel studs, lug nuts and thread locker compound, and the spacers are supplied in pairs. Spacer thickness and bolt pattern are separate measurements, so both need to match your setup. Because no particular vehicle is listed, check the bolt pattern and clearance against your own wheels and suspension before installing.
Key features
- 8×170 bolt pattern for eight-lug hubs
- 2 inch thickness for added wheel spacing
- Black anodized finish
- Pre-installed wheel studs, lug nuts and thread locker compound
- Supplied in pairs
- Spacer type, not an adapter
Checking clearance before mounting
Adding spacer thickness moves the wheel outward, which changes the offset and can shift the load on the wheel bearings and suspension joints. Check that the wheel clears the brake caliper, the fender and any suspension parts at full steering lock and at full compression. A spacer that rubs at either point should not be driven.
Because the studs and lug nuts come pre-installed, the spacer goes on as one assembly, which keeps the hardware matched to the spacer. Clean the hub face and spacer mating surfaces before mounting so the spacer sits flat. After the first few drives, recheck lug nut tightness, since spacers can settle as they seat.
- Check brake caliper clearance
- Test steering lock and suspension travel
- Clean hub and spacer surfaces before mounting
- Recheck lug nuts after the first drives
Specifications
| Brand | G2 Axle and Gear |
|---|---|
| Part number | 93-70-200 |
| UPC | 631410126259 |
| Type | Spacer |
| Bolt pattern | 8 on 170 (8×170 mm) |
| Thickness | 2 inch |
| Finish | Black anodized |
| Quantity | Supplied in pairs |
| Included hardware | Pre-installed wheel studs, lug nuts and thread locker compound |
Vehicle fitment
The bolt pattern to match is 8×170, the main check on your hub. Tire and suspension clearance vary by vehicle, so confirm both on your own setup before installing. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. Compare your hub’s pattern with 8×170 rather than relying on the brand or the title alone.
Installation notes
The studs, lug nuts and thread locker come already fitted, so the spacer and its hardware go on as one assembly. Because a 2 inch spacer pushes the wheel away from the hub, check tire clearance at full steering lock and suspension travel once the wheel is back on.
What’s included
A pair of 8×170 spacers, each with pre-installed wheel studs, lug nuts and thread locker compound.
Not included: wheels and tires.


















