Overview
The Baer Brakes 2000013 is a pair of 0.875 inch (7/8) thick premium aluminum wheel spacers for five-lug wheels with 5×4.25, 5×4.50 and 5×4.75 bolt patterns. Baer Brakes machines each spacer in-house from 6061-T6 billet aluminum and finishes it in clear anodized silver.
A wheel spacer pushes the wheel outward from the hub, which widens the track and gives the brake caliper more room. This 0.875 inch spacer suits owners whose brakes or wheels sit too close to the hub. Each spacer has a 6.000 in outside diameter, a 2.800 in center bore and five 0.562 in stud holes. Check the bolt pattern and center bore against your hub before ordering.
Key features
- Adds 0.875 inch (7/8) of spacing between hub and wheel
- Machined in-house from 6061-T6 billet aluminum
- Five lug holes for 5×4.25, 5×4.50 and 5×4.75 bolt patterns
- Clear anodized finish in silver
- Baer Brakes lists wider track and more brake clearance as benefits
- Sold as a pair with two spacers per box
- Manufactured in the USA.
Brake clearance and wheel fit
Brake clearance problems often show up as a caliper that rubs the inside of the wheel or a tire that sits tight against the fender. Moving the wheel outward changes where the caliper sits relative to the spokes, which can resolve contact without changing the brake components themselves. A spacer also shifts steering feel slightly, so most owners compare the result before and after a test drive on a smooth road. The wheel bearings and stud threads carry a different load once the wheel sits further out, so inspect the hub and studs after the first few drives.
Thicker spacers ask more of the hardware. Studs that are short or worn can lose thread engagement, so measure how far the nuts reach before tightening them down. Torque the lug nuts in a star pattern, recheck them after the first few miles, and inspect the aluminum body for cracks or fretting around the bore. Some owners pair a spacer with a longer set of studs or wheel bolts, and that choice should be made before the wheels go back on rather than after a problem appears.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2000013 |
| UPC | 844165004714 |
| Thickness | 0.875 in (7/8 inch) |
| Center bore | 2.800 in |
| Stud hole diameter | 0.562 in |
| Spacer outside diameter | 6.000 in |
| Lug holes | 5 |
| Bolt patterns | 5×4.25, 5×4.50, 5×4.75 |
| Material | 6061-T6 billet aluminum |
| Finish | Clear anodized |
| Color | Silver |
| Grade type | Premium |
| Sold as | Pair (box count 2) |
| Mounting hardware included | No |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is selected by bolt pattern, 2.800 in center bore and 0.562 in stud hole size, because those dimensions decide whether the spacer centers on your hub.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Stud engagement is the first thing to check. Baer Brakes warns that most cars cannot take more than 1/4 inch (.250) of spacing on stock studs, and that this is not always the case. This spacer adds 0.875 inch, which is well past that figure, so plan on studs long enough to keep full thread engagement once the spacer and wheel are installed.
What’s included
One pair of 0.875 inch wheel spacers, two spacers per box.
Not included: mounting hardware.












