Overview
The Baer Brakes Extreme front brake system, part 4261397R in red, is a front disc brake kit for 2010–2026 Ford F-150 trucks in 2WD and 4WD form. The kit also covers the Raptor. It replaces the front brakes with a 1-piece Monoblock 6-piston, 6S caliper and a 15-inch, 1-piece slotted, drilled rotor, suited to owners who want upgraded front stopping hardware on their F-150.
The caliper is manufactured in Phoenix, Arizona, and CNC machined from a US-sourced 2618 aluminum forging. It uses staggered pistons and the D1247 pad type. Mounting brackets and hardware come with the kit. The 15-inch Extreme is made for wheels of 19 inches or larger, so check wheel clearance before mounting.
Key features
- 1-piece Monoblock 6-piston, 6S caliper
- CNC machined from US-sourced 2618 aluminum forging
- Red powder coated finish
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons designed to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 1-piece slotted, drilled, zinc-plated rotor
Before you buy
A front brake upgrade on a full-size truck changes more than the stopping force at the pedal. A larger rotor and a multi-piston caliper raise the heat load on the pads, so pad compound matters as much as caliper size. The D1247 pad type is a starting point, and drivers who tow or make long descents often weigh pad choice against their daily driving needs.
Wheel clearance deserves a check before the truck is lifted or the wheels are swapped. Check offset and backspacing as well as diameter, because a caliper that clears one wheel can rub on another. Brake lines, hoses and the parking brake should also be checked after any front brake work.
Caliper and pad wear are normal, but uneven wear can point to a sticking slide pin or a tight bracket. Keep the pad surfaces clean and check the rotor for scoring at each regular service interval.
- Verify wheel diameter and clearance against the template
- Check pad compound against towing and daily use
- Inspect hoses and fittings after the first drive
- Re-torque lug nuts after the first few trail runs
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261397R |
| UPC | 844165035732 |
| Caliper | 6S, 6-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 15.0 inch |
| Rotor construction | 1-piece, vented |
| Rotor material | Iron |
| Rotor thickness | 1.18 |
| Rotor surface | Slotted, drilled and zinc plated |
| Pad type | D1247 (FMSI) |
| Minimum wheel diameter | 19.0 inch |
| Lug count | 6 lug |
| Wheel bolt pattern | 6x135mm |
| Template | N063U |
| Hose material | Re-uses OE hoses |
| Axle | Front |
| Drive | 2WD, 4WD |
| Grade | Performance |
| Front rotor included | Yes |
| Lug nuts included | No |
| Country of origin | US |
Vehicle fitment
It fits the 2010–2026 Ford F-150 trucks in 2WD and 4WD form.
This kit is designed for the 2010–2026 Ford F-150. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Test template N063U against the wheel you plan to run, because fit can vary across wheel styles and manufacturers. The kit re-uses the truck’s OE hoses. Brake work should be done by a qualified technician.
What’s included
Front 6-piston brake kit with the 6S caliper, 15-inch 1-piece rotor, mounting brackets and hardware.
Not included: Lug nuts.














