Overview
The Baer Brakes 4262691S Extreme Plus is a rear brake system for 2009–2011 Ford F-150 trucks with 6-lug hubs, covering 2WD and 4WD. It combines a one-piece monoblock 6-piston 6S caliper in silver with a 15 inch two-piece slotted, drilled rotor and a park brake shoe assembly.
The manufacturer fitment list for this kit covers the 2009–2011 Ford F-150. Baer’s applications line also names the Ford Raptor 10-11. The Extreme Plus fits most 19 inch or larger wheels, so check wheel clearance with the template before mounting.
Key features
- One-piece monoblock 6-piston 6S caliper, CNC machined from US sourced 2618 aluminum forging.
- Staggered pistons designed to minimize uneven pad wear.
- Dual seals for dust, weather and pressure.
- Stainless steel pistons, abutments and noise suppression clips with a powder coated silver finish.
- Two-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat.
- Park brake shoe assembly housed in Baer’s backing plate, which also serves as the caliper mount.
Park brake and original hoses
The park brake on this system is a shoe assembly built into the backing plate. Because the original cables are reused, their condition affects how the park brake holds. Cables that stick, stretch or fail to release fully can leave the shoes dragging or fail to hold the truck on a grade. Check them before the truck is driven.
Original hoses are also reused, so they deserve the same attention. Older rubber hoses can swell or crack after years of heat cycles, and a worn hose can undermine a newly built caliper setup. Inspecting the line ends, routing and any chafing points during the install helps catch problems before the first drive.
- Check cable travel at both ends
- Look for cracked or swollen hoses
- Confirm the park brake holds on a slope before driving
- Re-check fasteners after the first few drives
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262691S |
| UPC | 844165049869 |
| Sold as | Kit |
| Caliper | 6S, 6-piston, floating, one-piece monoblock |
| Caliper color | Silver |
| Rotor outside diameter | 15.0 inch |
| Rotor construction | 2-piece, vented |
| Rotor thickness | 1.25 |
| Rotor material | Iron with aluminum hat |
| Surface | Slotted, drilled and zinc plated |
| Pad FMSI number | D1247 |
| Template | N125U |
| Drive | 2WD and 4WD |
| Applications | Ford F150 09-11, Ford Raptor 10-11 |
| Lug count | 6 lug |
| Wheel bolt pattern | 6x135mm |
| Minimum wheel diameter | 19.0 inch |
| Grade | Performance |
| Park brake | Included |
| Park brake cables | Not included; original cables reused |
| Brake hoses | Original hoses reused |
| Lug nuts | Not included |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It is made for 2009–2011 Ford F-150 trucks and Ford Raptor 10-11 trucks.
Other F-150 generations and different models are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
- Use template N125U to compare the system against the wheel you plan to run; Baer cannot guarantee fit for every wheel style.
- Original equipment hoses and park brake cables are reused, so inspect them during installation.
- Brackets and hardware are included, and the rotor arrives pre-assembled with stainless hardware.
A park brake conversion should be checked by a qualified technician before the truck is driven.
What’s included
One-piece 6S monoblock caliper, the rear rotor pre-assembled with stainless hardware, the park brake shoe assembly in the backing plate, and brackets and hardware.
Not included: lug nuts and park brake cables, since the original cables are reused. Brake hoses are re-used from the original equipment.














