Overview
The Baer Brakes 4261636S-2 is a front 6T brake kit for Ford F-150 trucks from 2010 through 2026, including Raptor models. Finished in Silver, it combines a two-piece, six-piston direct mount caliper with a vented one-piece rotor, mounting brackets, stainless braided hoses and hardware.
The kit covers 2WD and 4WD trucks. The caliper takes the D1247 pad type, and the rotor measures 13.5 inch across. The kit is built for wheels 17 inches or larger, so check clearance against the O080M template before mounting.
Key features
- Two-piece, six-piston 6T caliper with a direct mount design
- Staggered pistons intended to reduce uneven pad wear
- Stainless steel pistons, abutments and noise suppression clips
- Dual seals against dust, weather and pressure
- Vented one-piece slotted and zinc-plated rotor
- Machined from US-sourced forged or billet aluminum with a powder coated finish
- Stainless braided steel hoses, DOT approved
- Made in Phoenix, AZ
Towing and daily driving
A front brake kit on a full-size truck handles more weight than one on a light vehicle, so heat and pad wear build faster under towing or on steep grades. A larger rotor and six-piston caliper help spread that heat. Choose pads that suit how the truck is used, since semi-metallic pads offer firm bite under heavy loads but can be dustier on wheels.
Check the front wheel bearings, ball joints and tie rod ends when installing a brake upgrade, because worn steering parts can change how the brakes feel under hard stops. Confirm the hub surface is clean and flat before setting the rotor. Keep the caliper slide pins lubricated so the caliper moves freely and wears pads evenly.
- Inspect rotor runout with a dial indicator before final assembly
- Replace the brake fluid during the same service
- Retorque lug nuts after the first short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261636S-2 |
| UPC | 90127970317 |
| Caliper | 6T, two-piece, six-piston |
| Caliper color | Silver |
| Caliper type | Fixed, direct mount |
| Rotor type | One-piece, slotted and zinc-plated |
| Rotor construction | Vented |
| Rotor outside diameter | 13.5 inch |
| Rotor thickness | 1.25 |
| Minimum wheel diameter | 17.0 inch |
| Wheel bolt pattern | 6×5.312 inches |
| Lug count | 6 |
| Brake pad FMSI number | D1247 |
| Friction material | Semi-metallic |
| Brake hose | Steel braided, DOT approved |
| Grade type | Performance |
| Emission code | 6 |
| Template | O080M |
| Drive | 2WD, 4WD |
| Applications | Ford F150 10-26 |
| Axle | Front |
| Sold as | Kit |
| Country of origin | USA |
Vehicle fitment
It fits the 2010–2026 Ford F-150 on the front axle, covering 2WD and 4WD trucks including Raptor. It also covers Ford F150 10-26 applications.
No other Ford models are covered by this kit. Confirm your truck’s year and trim before ordering.
Installation notes
Hoses are supplied for stock-height trucks, and lifted F-150s may need longer hoses. Baer cannot promise a match with every wheel design, so hold the wheel against the template before committing to a set.
What’s included
The kit includes the 6T caliper, the one-piece rotor, mounting brackets, stainless braided hoses and hardware.
Not included: Wheels, which need a minimum diameter of 17.0 inch.
