Overview
The Baer Brakes 4262264R is a rear disc brake kit built around the SS4 four-piston caliper and a 12-inch one-piece slotted, drilled rotor, made for Ford 9 Inch rear ends with Torino (Late Big) bearing housing ends and a 5×5.00 wheel bolt pattern. The red caliper and zinc-plated rotor are the most visible parts of the setup.
The backing plate carries the caliper and houses a one-piece park brake shoe assembly, so the parking brake sits inside the same hardware. The kit fits most 16-inch or larger wheels, but fit with every wheel style is not guaranteed, so check the template against your wheel before ordering.
Key features
- Four-piston S4 caliper in red with a fixed design
- 12.0 inch one-piece slotted, drilled, zinc-plated iron rotor, vented construction
- Backing plate that mounts the caliper and houses the park brake shoe assembly
- Hard anodized aluminum pistons with stainless steel abutments and noise suppression clips
- Dual dust, weather and pressure seals
- Stainless steel braided brake hoses, DOT approved
- Pads: DR1 or HB100, FMSI DR1-C
Rear disc upgrade considerations
A rear disc kit changes how the axle handles stopping force, so the rotor, caliper and backing plate need to be matched as one assembly. Pad choice matters as much as the hardware. Pads that suit the rotor material and the driving you do wear more evenly and keep noise down, while a mismatched compound can glaze the rotor or fade on long descents.
Park brake function deserves attention during setup. When the parking shoe sits inside the backing plate, cable routing and adjustment affect whether the parking brake holds on a grade. After the hydraulic lines are connected, check that the cables move freely and that the shoes engage evenly before relying on the brake off road.
Routine inspection is straightforward. Look at pad thickness, rotor surface and hose condition at each service interval, and check the caliper pistons and seals for leaks. Signs that the old parts are worn include pulsing at the pedal, grinding, or a soft pedal that needs more travel than before.
- Check pad thickness at every tire rotation
- Inspect braided hoses for chafing and bulges
- Confirm park brake cable routing before the first drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262264R |
| UPC | 844165028581 |
| Sold as | Kit |
| Caliper | S4, four-piston, fixed |
| Caliper color | Red |
| Rotor outside diameter | 12.0 inch |
| Rotor type | One-piece, slotted, drilled, zinc plated |
| Rotor construction | Vented |
| Rotor material | Iron |
| Rotor thickness | 1.02 |
| Pad type | DR1 or HB100 (FMSI DR1-C) |
| Park brake | Included, one-piece shoe assembly |
| Brake hose | Stainless steel braided, DOT approved |
| Axle flange | Ford 9 Inch Torino / Late Big bearing |
| Wheel bolt pattern | 5×5.00 |
| Lug count | 5 lug |
| Minimum wheel diameter | 16.0 inch |
| Template | S113E |
| Emission code | 6 |
| Country of origin | US |
Vehicle fitment
It fits Ford 9 Inch rear axles with Torino (Late Big) bearing housing ends and a 5×5.00 bolt pattern. Match those to your axle before ordering.
Fit with every wheel style is not guaranteed, so compare the S113E template with your wheel. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The backing plate bolts to the axle housing flange, so confirm the Torino bearing pattern before starting. Park brake cables are not supplied, and the parking brake will not work until cables are routed and connected. Bleed the hydraulic system after the braided hoses are fitted.
What’s included
The kit includes the S4 caliper, the 12-inch one-piece rotor, the backing plate with its park brake shoe assembly, and stainless braided hoses.
Not included: park brake cables and wheel lug nuts.















