Overview
The Baer Brakes Extreme Plus rear brake system, part number 4262691B, is a black rear disc brake kit for 2009–2011 Ford F-150 and 10-11 Ford Raptor trucks in 2WD and 4WD configurations with 6-lug, 6x135mm wheels. It fits the 2009–2011 Ford F-150 and is also made for the 10-11 Ford Raptor.
The kit centers on a 1-piece monoblock, 6-piston, 6S caliper that clamps a 15 inch 2-piece slotted, drilled, zinc-plated rotor with a billet aluminum hat. Baer’s backing plate serves as the caliper mount and also houses a 1-piece park brake shoe assembly, so the kit works as a conversion option for owners who need that park brake function. Brackets and hardware are included.
Key features
- 1-piece monoblock, 6-piston, 6S caliper in black
- CNC machined from U.S.-sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 15 inch 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat, pre-assembled with NAS high grade stainless hardware
- Powder coated finish
- Park brake shoe assembly housed in the backing plate
Park brake conversion notes
A rear disc kit with a park brake function changes how the truck handles its weight under braking, so the axle and wheel assembly deserve a careful check before the first drive. Rear pads and rotors wear at different rates than the fronts, and a conversion like this ties the park brake to the caliper and rotor, so a worn pad or sticking piston affects both service braking and parking. Before installation, look over the existing hard lines, fittings and cable routing.
Park brake cables are often replaced with the rotors on older trucks because they stretch and corrode over time. Check that the cable adjustment lets the shoes return fully when released. Clean the hub face where the backing plate seats, since a poor mounting surface can cause runout and vibration under braking.
- Inspect park brake cables before reusing them
- Check pad thickness at each service
- Bed in new pads gradually
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262691B |
| UPC | 844165049845 |
| Sold as | Kit |
| Axle | Rear |
| Drive | 2WD, 4WD |
| Lug count | 6 lug |
| Wheel bolt pattern | 6x135mm |
| Caliper | 1-piece monoblock, 6-piston, 6S |
| Caliper color | Black |
| Caliper type | Floating |
| Rotor outside diameter | 15.0 inch |
| Rotor type | 2-piece |
| Rotor construction | Vented |
| Rotor material | Iron with aluminum hat |
| Rotor surface | Slotted, drilled, zinc plated |
| Rotor thickness | 1.25 inch |
| Minimum wheel diameter | 19.0 inch |
| Pad FMSI number | D1247 |
| Template | N125U |
| Park brake included | Yes |
| Brake hoses | Re-uses original hoses |
| Park brake cables | Re-uses original cables |
| Grade | Performance |
| Country of origin | US |
Vehicle fitment
The kit fits 2009–2011 Ford F-150 trucks and is also made for the 10-11 Ford Raptor. Match your truck’s year, model and trim to these entries before buying.
Trucks outside the 2009–2011 F-150 years and other Ford models are not covered. Wheel clearance depends on wheel style, so compare the N125U template against your wheel before fitting. Confirm fit for your vehicle’s year, model and trim before buying.
Installation notes
The park brake shoe assembly sits inside the backing plate, so the park brake function arrives with the caliper and rotor. The kit re-uses the original hoses and park brake cables instead of supplying new ones. Rear brake work changes stopping distance, so test the brakes at low speed before normal driving.
What’s included
The kit includes the 6S monoblock caliper, the mounting backing plate with park brake shoe assembly, the 15 inch rotors pre-assembled with stainless hardware, and brackets and hardware.
Not included: lug nuts. The original hoses and park brake cables are re-used from the vehicle.














