Overview
The Baer Brakes Extreme Plus rear brake kit, part 4262205B in black, covers Ford 9 Inch early big bearing rear housing ends with a 5×5.00 bolt pattern. The 6S monoblock caliper has six pistons and clamps a 14 inch, 2-piece slotted and drilled rotor, while the park brake shoe assembly is built into the backing plate. It suits anyone converting a big bearing 9 inch rear end to Baer disc brakes on this bolt pattern.
The backing plate serves as the caliper mount, and the rotors come pre-assembled with NAS high grade stainless hardware. Stainless braided hoses are also supplied. Since the 14 inch rotor fits most wheels 18 inch or larger, Baer advises using the N085P template to compare the system with your chosen wheel, because it cannot promise fit with every wheel style.
Key features
- 1-piece monoblock, 6-piston, 6S caliper, manufactured in Phoenix, Az
- Black powder coated caliper finish
- CNC machined from U.S.-sourced 2618 aluminum forging
- Stainless steel pistons, abutments and noise suppression clips
- Staggered pistons to minimize uneven pad wear
- Dual seals for dust, weather and pressure
- 2-piece slotted, drilled, zinc-plated rotor with billet aluminum hat
- Stainless braided hoses included
Keeping the braking system healthy
Rear disc brakes on a big bearing 9 inch axle carry real load during towing and hard stops, so the rotor, caliper and backing plate should be checked on a regular schedule. Look at pad thickness and rotor edges, and listen for scraping that may point to a misaligned caliper. The rotor is a wear item, so measure it at each service rather than waiting for a pulse under braking.
Because the caliper and park brake share a backing plate, any repair on one side affects the other. Keep the bolts snug, keep dust from building up around the seals and avoid contaminating the pads with grease. Stainless hoses are durable but should still be inspected for chafing where they pass near suspension parts.
- Inspect the rotor for scoring or cracks
- Check caliper bolts for torque after the first drives
- Keep grease away from pad friction surfaces
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4262205B |
| UPC | 844165037286 |
| Sold as | Kit |
| Axle | Rear |
| Axle flange | Ford 9 Inch Early Big Bearing |
| Wheel bolt pattern | 5×5.00 (5 lug) |
| Caliper | 6S, 1-piece monoblock, fixed, 6 pistons, black |
| Rotor outside diameter | 14.0 inch |
| Rotor thickness | 1.25 |
| Rotor type | 2-piece, vented, slotted and drilled |
| Rotor material | Iron with aluminum hat |
| Pad FMSI number | D1247 |
| Template | N085P |
| Minimum wheel diameter | 18.0 inch |
| Hose material | Stainless steel |
| Includes park brake | Yes |
| Grade type | Performance |
| Country of origin | US |
Vehicle fitment
It is built for Ford 9 Inch early big bearing rear axle housing ends with a 5×5.00 bolt pattern. These details identify an axle housing end rather than a single vehicle, so confirm the flange type and bolt pattern on your axle before ordering.
Confirm your vehicle’s year, model and trim before ordering, and check the flange type and bolt pattern on your rear axle.
Installation notes
Rotors arrive assembled with their stainless hardware. The park brake shoe is a single piece housed in the backing plate, which also mounts the caliper, so no separate park brake shoe needs fitting. Measure your wheel against the N085P template and confirm 18 inch minimum wheel clearance before fitting. Have a qualified technician bleed the brakes once the lines are connected.
What’s included
Included are the 6S monoblock caliper, the 14 inch 2-piece rotor with billet aluminum hat, the pre-assembled stainless hardware, the 1-piece park brake shoe assembly, the backing plate and stainless braided hoses.
Not included: park brake cables, lug nuts and the front rotor must be sourced separately.















