Overview
The Baer Brakes Pro Plus 13.0 Inch Brake System in black, part number 4261216B, is a front disc brake kit with a six-piston caliper for 1970 to 1974 Ford and Mercury cars with drum brake spindles. It fits the Ford Torino and Mercury Montego for 1970 and 1971, along with the Falcon, Fairlane, Maverick, Mustang, Comet, Cougar and Cyclone.
The black caliper sits on a 13-inch rotor, and the kit includes the front rotor. Billet aluminum hubs come with the assembly, and the mounting brackets and stainless braided hoses are part of the package. Lug nuts are not included.
Key features
- Six-piston fixed caliper in a powder coated black finish
- Stainless hardware on the pistons, abutments and noise clips
- Staggered pistons designed to limit uneven pad wear
- Vented two-piece rotor, slotted, drilled and zinc plated, with aluminum hat
- Billet aluminum hubs with premium bearings and billet dust caps
- Dual seals for dust, weather and pressure
- Steel braided hoses, DOT approved
- Pads listed under FMSI D0731
Steel braided hoses in service
Braided steel hoses are a common upgrade on drum-to-disc conversions because they hold their shape better under pressure than rubber lines. They still need the same care as any brake line. Route them so they do not rub on the control arms, springs or steering components, and leave enough slack for full suspension travel and steering lock. A hose that is kinked or chafed at a bracket should be replaced rather than reused.
Hoses are usually replaced along with the pads and fluid when a brake system is opened up. Check the fittings for seepage at each service and watch for a soft pedal after the hoses have been moved. Fluid that has absorbed moisture over time should be flushed, since it can lower the boiling point and affect braking under heavy use.
- Route clear of suspension and steering
- Check fittings for seepage
- Flush fluid on a regular schedule
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 4261216B |
| UPC | 844165021353 |
| Caliper | 6-piston, 6P, fixed |
| Caliper color | Black |
| Rotor outside diameter | 13.0 inch |
| Rotor construction | Two-piece, vented |
| Rotor style | Slotted, drilled, zinc plated |
| Rotor material | Iron with aluminum hat |
| Rotor thickness | 1.1 |
| Brake pad FMSI number | D0731 |
| Minimum wheel diameter | 17.0 inch |
| Wheel bolt pattern | 5 lug, 5×4.50 |
| Wheel stud size | 1/2-20 x 2.25 inch |
| Brake hose | Steel braided, DOT approved |
| Template | Q082H |
| Emission code | 6 |
| Grade type | Performance |
| Country of origin | US |
| Front rotor included | Yes |
| Lug nuts included | No |
Vehicle fitment
It fits 1970 Ford Fairlane, 1970 Ford Falcon, 1970–1974 Ford Maverick, 1970–1973 Ford Mustang, 1970–1971 Ford Torino, 1971–1974 Mercury Comet, 1970–1973 Mercury Cougar, 1970 Mercury Cyclone and 1970–1971 Mercury Montego. Each entry assumes the OE drum brake spindle.
Torinos from 1972 on and Montegos from 1972 on are not in this list, and neither are Mustangs or Cougars from 1974. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Only drum brake spindles suit this kit, so check the spindle type first. Lay the Q082H template against the wheel you plan to run, since fit to every wheel style is not guaranteed. The steel braided hoses are supplied, so route them clear of moving suspension parts.
What’s included
- Black six-piston caliper
- Two-piece front rotor with pre-assembled stainless hardware
- Billet aluminum hubs
- Mounting brackets and hardware
- Stainless braided hoses
Not included: lug nuts.














