Overview
The Baer Brakes 54110-020 is a front Claw performance brake rotor, sold as a set, for the 2004-2008 Ford F-150 and the 2006-2008 Lincoln Mark LT. The title places it on new-body Ford F-150 trucks in 2WD and 4WD configurations, and on the 4WD Lincoln Mark LT, with a 7-lug hub pattern. It is a rotor only part.
The slotted and cross-drilled friction face carries gases and dust away from the pad and rotor interface. The vane structure supports cooling, and the zinc-plated finish suits open center wheels. The design is intended to support a more consistent pedal feel and less brake fade.
Key features
- Slot and drill pattern that helps gases and dust clear the pad-to-rotor interface
- Vane structure Baer describes as enhanced for cooling
- Mill-balanced, premium direct replacement design
- Chamfered drilled holes to limit stress cracking
- Zinc-plated finish suited to open center wheels
- Vented one-piece cast iron construction with 7 lug holes
Pairing pads and calipers
Because this is a rotor only part, the pads, calipers and hardware are separate purchases. Choose pads that suit the way the truck is driven, whether that is towing, daily commuting or off-road use. Heavy towing places more heat into the front brakes, so pad choice matters more on loaded trucks. Match the pad type to the rotor material and check that the caliper bracket and slide pins are in good condition.
A new rotor surface wears pad material differently than a worn one, so bedding the new pads properly helps the brakes perform evenly. After the rotors are fitted, make several moderate stops before any hard braking. Recheck the lug nut torque after the first few drives, and inspect the front brakes at the next service.
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 54110-020 |
| UPC | 844165033714 |
| Axle | Front |
| Sold as | Set |
| Scope | Brake rotor only |
| Construction | One piece, full cast |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Slotted x drilled |
| Brake surface | Directional |
| Disc finish | Zinc plated |
| Drive | 2WD, 4WD |
| Grade type | Premium |
| Stud/lug hole quantity | 7 |
| Mounting bolt hole circle diameter | 150 |
| Outside diameter | 329.95 |
| Overall height | 48 |
| Discard thickness | 28.5 |
| Emission code | 6 |
| ABS tone ring included | No |
| Country of origin | CN |
Vehicle fitment
The manufacturer fitment list includes two front entries: 2004-2008 Ford F-150 and 2006-2008 Lincoln Mark LT. The F-150 entry covers RWD and 4WD configurations, and the Mark LT entry is for 4WD.
Other F-150 years, the 2009 and later trucks, and models not named in this list are not covered. Confirm your vehicle’s year, model and trim before ordering, including whether it is 2WD or 4WD.
Installation notes
The ABS tone ring is not included, so the existing tone ring must be carried over. Confirm the hub pattern is 7-lug before mounting. A qualified technician should inspect the front brakes after installation.
What’s included
A pair of front rotors, sold as a set, rotor only.
Not included: Brake pads, brake calipers and the ABS tone ring.
