Overview
The Baer Brakes 6919251 is a left-side, 2-piece replacement brake rotor for select Baer Brake systems. It is a vented, plain-finish cast iron rotor with a 14.36 inch outside diameter and 1.1 inch nominal thickness, built for the left-side position.
The rotor is performance grade, with a curved vane design for cooling and dynamic balancing for vibration-free running. Because it is directional, the left-side part is a separate item from the right-side rotor, which is not included. Part number 6919251 and UPC 90127961575 identify this item.
Key features
- Purpose-built castings made from premium materials
- Curved vane design for optimum cooling
- Designed for rotor stability and resistance to distortion
- Dynamically balanced for vibration-free performance
- Vented, directional brake surface with a plain finish
- Two-piece construction in cast iron, performance grade
Bedding and break-in
A plain friction face is the simplest surface for a rotor. It gives pads an even contact area, which many drivers prefer for daily use because pedal feel stays predictable when the surface wears evenly. Plain rotors can glaze if pads overheat, so avoid heavy stops right after installation.
Break-in matters on any new rotor. Drive gently for the first few stops, then make a series of moderate stops to transfer an even pad layer to the new surface. Check wheel bearing play, the caliper slide pins and the hub face before the first drive, since a rotor mounted on a worn hub wears unevenly.
- Clean the hub face and rotor hat before mounting
- Torque wheel fasteners in a star pattern
- Re-check lug torque after the first drive
- Note any pulsation, which can point to uneven thickness
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6919251 |
| UPC | 90127961575 |
| Axle position | Left |
| Construction | Two piece |
| Material | Cast iron |
| Outside diameter | 14.36 in |
| Nominal thickness | 1.1 in |
| Mounting bolt hole quantity | 12 |
| Mounting bolt hole circle diameter | 8.8 in |
| Rotor type | Vented |
| Brake surface | Directional |
| Surface type | Plain |
| Grade type | Performance |
| ABS tone ring included | No |
| Emission code | 6 |
| Country of origin | USA |
| Sold as | Each |
Vehicle fitment
This rotor is made as a replacement for select Baer Brake systems.
Installation notes
The rotor is directional, so confirm its orientation and left-side position before mounting. The ABS tone ring is not part of this package, so verify the hub and tone ring setup before the wheel goes back on. Brake components affect stopping performance, so have a qualified technician verify the installation.
What’s included
One left-side, 2-piece vented replacement brake rotor, sold as each.
Not included: The ABS tone ring is absent from this package, and the opposite-side rotor is a separate item.
