Overview
The Baer Brakes 6929270 is a right-side, slotted, 2-piece replacement brake rotor with a 13.85 inch outside diameter and 1.25 inch nominal thickness. It is a vented cast iron rotor ring for select Baer Brake systems, sold individually, and it is made for the right side of the vehicle only.
The rotor has 12 mounting holes on a 7.5 inch bolt circle diameter with a stepped flange. Its surface is slotted. The rotor is directional and made for the right side of the vehicle, so a left-side rotor should not be used in its place. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Slotted friction surface, the finish named in the part title.
- Two-piece construction with a vented cast iron rotor ring.
- Directional design for the right side only.
- Curved vane design, which Baer Brakes says helps cooling.
- The castings are purpose built for this application.
- Designed for rotor stability and resistance against distortion.
- Dynamic balanced for vibration-free performance.
Choosing a slotted rotor
A slotted rotor has grooves cut across the friction surface. The grooves let gas and pad debris leave the contact area, which helps keep the surface cleaner during repeated stops. On a vehicle driven hard on pavement or on trails with heavy braking, that can make pad performance more consistent. The slots do not replace good pad selection, and the pad compound still matters more for stopping power and wear.
Before buying a replacement, match the hub to the rotor. Right-side and left-side rotors are not interchangeable, and the hub face must be clean and flat. Measure runout with a dial indicator once the rotor is mounted, and check that the wheel studs and lug nuts are in good condition. Rotors are often replaced in pairs on the same axle so braking stays even.
- Replace pads at the same time as the rotor
- Clean the hub face before mounting
- Bed in new pads after installation
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 6929270 |
| UPC | 90127962459 |
| Axle side | Right |
| Construction | Two piece |
| Material | Cast iron |
| Rotor type | Vented |
| Surface type | Slotted |
| Brake surface | Directional |
| Outside diameter | 13.85 inch |
| Nominal thickness | 1.25 inch |
| Bolt hole circle diameter | 7.5 inch |
| Bolt hole quantity | 12 |
| Hub style | Stepped flange |
| Grade type | Performance |
| Emission code | 6 |
| ABS tone ring included | No |
| Sold as | Each |
| Country of origin | USA |
Vehicle fitment
This rotor is a replacement for select Baer Brake systems. Match the 13.85 inch diameter, the 12-hole pattern on a 7.5 inch bolt circle, and the right-side orientation against your current hardware. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the rotor is directional, verify that the right-side marking matches the hub before mounting. The ABS tone ring is not included, so any tone ring already on the hub must be reused or sourced separately. Check hub and rotor fit before installation.
What’s included
One right-side 2-piece replacement rotor ring, sold individually.
Not included: ABS tone ring.
