Overview
The Baer Brakes Big Claw 2301049 is a pair of front disc brake rotors for GM 1500 trucks and SUVs, covering 2005 to 2017 models of the Silverado 1500, Sierra 1500, Tahoe, Suburban, Yukon and Escalade. These are conventional, vented, one-piece full cast iron rotors measuring 15 inch in outside diameter.
Baer designs the Big Claw rotors to be larger than stock, with curved directional vanes for cooling and a cross-drilled and slotted friction surface. Baer ties the improvement to added brake torque and leverage from the bigger diameter, and says rotor temperatures can run up to 200 degrees cooler than OE in extreme conditions.
Key features
- 15 inch outside diameter vented rotor
- Curved vane design for cooling
- Slotted and cross-drilled friction surface
- Zinc-plated finish with a rust-resistant coating
- Floating design
- Six holes on a 5.5 inch bolt circle, 0.625 inch diameter
- Direct bolt-on installation with no brake bleeding required
Choosing the right front setup
Front rotors work against the pads and calipers as a matched system, so a rotor change is a good time to look at the whole front brake assembly. Larger-diameter rotors give the pads more swept area, which can help on heavier trucks and SUVs that tow or carry loads down long grades. Hub and bearing condition also matter, since runout or a worn hub face shows up as pedal pulsation no matter how good the rotor is.
Pad compound should suit the rotor surface and how the vehicle is used. Cross-drilled and slotted faces shed gas and debris but can wear some pad compounds faster, so choose pads with that in mind. Check the caliper slide pins and boots at the same time, because a sticking caliper causes uneven rotor wear even when the new rotor is in good shape.
- Replace pads with the rotors when pad thickness is low
- Clean hub faces with a wire brush before mounting
- Torque lug nuts in a star pattern and recheck after a short drive
Specifications
| Brand | Baer Brakes |
|---|---|
| Part number | 2301049 |
| UPC | 844165004257 |
| Sold as | Set |
| Axle | Front |
| Rotor type | Conventional |
| Solid or vented | Vented |
| Construction | One piece, full cast |
| Material | Cast iron |
| Outside diameter | 15 inch |
| Center hole diameter | 3.094 inch |
| Nominal thickness | 1.181 inch |
| Discard thickness | 1.098 inch |
| Overall height | 2.177 inch |
| Mounting bolt hole circle | 5.5 inch |
| Mounting bolt hole diameter | 0.625 inch |
| Mounting bolt holes | 6 |
| Surface type | Slotted x drilled |
| Vent design | Curved |
| Finish | Zinc plated |
| Floating | Yes |
| ABS tone ring included | No |
| Grade | Performance |
| Warranty | Limited 1 year |
| Country of origin | US |
Vehicle fitment
The manufacturer fitment list covers 2007–2017 Cadillac Escalade; 2005–2017 Chevrolet Silverado 1500; 2007–2014 Chevrolet Suburban 1500; 2007–2017 Chevrolet Tahoe; 2005–2017 GMC Sierra 1500; and 2007–2017 GMC Yukon. Trims include Hybrid, LS, LT, LTZ, SLE, SLT, SL, Denali and WT depending on the model.
Front rotors fit only the models above. Confirm your vehicle’s year, model and trim before ordering, since 2015 to 2018 Suburban and Yukon XL models and 2018 trucks fall outside the fitment coverage.
Installation notes
Installation is direct bolt-on with no brake bleeding. Check wheel clearance against the front wheel and spare before mounting, since fit varies by wheel style. A technician should check pad contact and caliper movement after the first stops.
What’s included
A pair of front rotors sold as a set, with a limited 1 year warranty.
Not included: Pads, calipers and brackets are not part of this set.

















