Overview
The Bilstein 33-185897 is a 4600 Series monotube shock absorber with a 2 in body diameter, a yellow finish and boots included. It fits the 2004–2008 Ford F-150 and the 2006–2008 Lincoln Mark LT Base.
Bilstein says its monotube gas charged design moves heat from the oil to the outer surface of the shock body, where it dissipates more efficiently. A dividing piston lets the oil expand as heat builds, which Bilstein says prevents aeration (foaming) and viscosity loss, so the shock keeps its full damping as temperatures rise. The tube is made with a special extrusion method for a tight peak-to-valley tolerance and consistent wall thickness.
Key features
- Monotube gas charged construction that Bilstein says moves heat from the oil to the shock body.
- Dividing piston that lets the oil expand as it heats, reducing aeration (foaming) and viscosity loss.
- Seamless monotube tube design that Bilstein says gives superior tube strength.
- Piston head that allows independent tuning of compression and rebound damping forces.
- Fewer parts than many twin tube and road sensing shock designs.
- Boots included.
Before you buy
Monotube gas charged shocks handle heat differently from twin tube designs. The divided piston lets the oil expand as it warms, so damping holds up on long grades and repeated bumps. Because the body is sealed and pressurized, it should be replaced as a unit rather than opened. Keep the boot in good shape, since a torn boot lets grit reach the shaft and seal.
Before buying a replacement for an F-150, check the model year and trim against your truck. Shocks are usually replaced in pairs on the same axle so both sides control the body the same way. If you tow or carry heavy loads, check that the shock suits that work before you commit.
- Replace shocks in pairs on the same axle
- Check the boot for cracks or tears
- Look for oil on the outside of the body
Specifications
| Brand | Bilstein |
|---|---|
| Part number | 33-185897 |
| UPC | 651860479835 |
| Shock series | 4600 Series |
| Type | Monotube |
| Hydraulic / gas charged | Gas charged |
| Body diameter | 2 in |
| Finish | Yellow |
| Reservoir | No |
| Boots included | Yes |
Vehicle fitment
The manufacturer fitment list covers the 2004–2008 Ford F-150 in the FX4, Harley-Davidson Edition, King Ranch, Lariat, STX, THE 60TH ANNIVERSARY EDITION, XL and XLT trims, and the 2006–2008 Lincoln Mark LT Base. Match your truck’s trim against that list exactly, since trims are named individually.
Other F-150 generations and other Lincoln Mark models are not in the list and are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Shock absorber with boots included.
Not included: Check the package contents against your installation before starting.









