Overview
The Bilstein B8 5100 Shock Absorber, part number 24-245487, is a front position gas charged shock with adjustable ride height, rated for 0-2.5 in. of lift. It has a 46mm diameter and a monotube body.
Bilstein credits gas pressure construction with improved ride and handling, added traction and enhanced stability. The brand also cites increased durability and performance from ride tuning made for each vehicle.
Key features
- Gas pressure construction
- Ride height adjustable for 0-2.5 in. of lift
- Monotube body
- Improved ride and handling
- Added traction and enhanced stability
- Vehicle specific ride tuning
Matching ride height to lift
Adjustable ride height lets the shock length be set to suit the lift and tire size you run. A setting that is too long can leave little compression travel, while a setting that is too short can limit extension and cause the shock to bottom out on rough ground.
Gas pressure construction and a monotube body help the shock keep its damping steady during repeated hard use. Heat builds up on longer drives and trail runs, and a well built gas charged body handles that better than a worn or overfilled unit. Vehicle specific tuning matters most when the setup stays close to the intended height.
After adjusting, drive the vehicle through a short loop and check clearance at the tires, brake lines and steering components. Re-check the setting after tire changes, since a different tire diameter can change the effective height.
- Measure ride height before and after each change
- Check clearance at full steering lock
- Re-check after tire size changes
Specifications
| Brand | Bilstein |
|---|---|
| Product line | B8 5100 |
| Part number | 24-245487 |
| UPC | 651860754574 |
| Position | Front |
| Shock series | 5100 Series |
| Body type | Monotube |
| Charge | Gas charged |
| Diameter | 46mm |
| Ride height | Adjustable; 0-2.5 in. lift |
Vehicle fitment
Confirm fit for your vehicle’s year, model and trim, and for the lift height you run, before fitting it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because ride height is adjustable, the setting should match the lift you run, within the 0-2.5 in. range listed.
What’s included
Check the package contents against your installation before starting.
















