Overview
The Auburn Gear 542022 is an H/P Series limited slip differential assembly for a GM 8.5 inch 10 bolt axle with 30 splines. The axle location is given as front or rear. Its preloaded tapered cone clutch is the core of the design.
The H/P line is built for both pavement and trail use. Compare the 30 spline count before ordering a GM 10 bolt option, and the unit carries a 4 year replacement D-REX program.
Key features
- H/P Series design for pavement and trail use.
- Preloaded tapered cone type clutch
- Limited slip assembly for GM 8.5 inch 10 bolt axles
- 30 splines
- Front or rear axle location
- 4 year replacement D-REX program
Choosing a GM 10 bolt unit
A limited slip differential sends torque to both wheels when one loses grip, which helps on loose gravel, mud and snow. The preloaded clutch pack keeps some resistance between the wheels at all times, so the unit engages before traction is fully lost. That behavior can feel different from an open differential on pavement, especially during tight turns, so expect a short adjustment period after the install.
When choosing between GM 10 bolt units, measure the axle housing and count the splines on both axle shafts first. Gear ratio must match the rest of the drivetrain, and a new carrier often calls for matched bearings and pinion shims. Many shops replace the axle bearings and seals at the same time, since the housing is already open.
- Count splines on both axle shafts
- Confirm the housing matches the 8.5 inch size
- Match gear ratio to the existing ring and pinion
- Plan fresh gear oil with a limited slip additive
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542022 |
| UPC | 81499600022 |
| Series | H/P Series |
| Differential type | Limited slip assembly |
| Clutch system | Preloaded tapered cone type |
| Axle manufacturer | GM |
| Axle location | Front or rear |
| Axle type | GM 10 bolt, 8.5 inches |
| Axle spline count | 30 splines |
Vehicle fitment
The unit is sized for the GM 8.5 inch 10 bolt axle with 30 splines. Confirm the spline count and axle location match your axle. The GM 8.5 inch 10 bolt unit with 28 splines (542018) is a different part. Check fit against your vehicle’s year, model and trim before ordering.
The GM 8.5 inch 10 bolt unit with 28 splines (542018) is a different part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a complete differential, so installation means swapping out the current unit. Count the 30 splines on your axle shafts and confirm the axle location before the carrier goes in. A shop experienced with limited slip gears should handle setup.
What’s included
It is a complete limited slip differential assembly. Check the package contents against your installation before starting.










