Overview
The Auburn Gear 545001 is an ECTED Max selectable locker for 8.8 inch Ford and Mazda axles with 28 splines. It combines a full-time limited slip with a full locking differential that an in-vehicle switch engages. It is made for front or rear axle location.
The mode can be selected on the fly at moderate speeds, moving from limited slip to full spool with a switch. Match the axle type and spline count to your housing before fitting.
Key features
- Full-time limited slip operation
- Full locking mode engaged by an in-vehicle switch
- Mode change on the fly at moderate speeds.
- 28 spline axle count
- Ford 8.8 Inches and Mazda 8.8 Inches axle types named
Choosing the right setup
A selectable locker suits drivers who want traction on loose or uneven ground and a normal full-time limited slip on pavement. Because the mode can change at moderate speeds, it is worth thinking about how often you will want full lock and whether you can reach the switch easily from the driver’s seat. Axle housing type and spline count come first, so a shop can confirm the match before any parts are ordered.
Lockers place extra load on axle shafts, the ring gear and the pinion, so inspect the bearings, seals and axle shafts while the unit is installed. Many builders replace worn gear sets and check carrier backlash together with the locker, since a new unit on an old carrier can be harder to set up.
- Confirm housing type before ordering
- Plan the switch location and wiring early
- Check axle shafts and bearings during install
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 545001 |
| UPC | 814996006010 |
| Differential type | Selectable locker (ECTED Max) |
| Locking mode | Full lock via in-vehicle switch |
| Axle manufacturer | Ford |
| Axle type | Mazda 8.8 Inches or Ford 8.8 Inches |
| Axle location | Front or rear |
| Axle spline | 28 splines |
Vehicle fitment
It fits Ford 8.8 inch and Mazda 8.8 inch axles with 28 splines, for front or rear location. Confirm fit for your vehicle’s year, model and trim before ordering.
Other axle sizes are not covered by these named types. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Full lock needs an in-vehicle switch and a wiring circuit, which must be planned before installation. Set carrier backlash and bearing preload, and allow a break-in period for the clutch.
What’s included
Confirm the switch, wiring and hardware contents against your installation before starting.








