Overview
The Auburn Gear 5420111 is a Dana 44 limited slip differential with 19 splines, made for 3.92 and up gear ratios. It belongs to the H/P Series, which uses a preloaded tapered cone clutch for limited slip action on and off road. It is matched by axle type rather than by vehicle.
Key features
- Preloaded cone clutch for limited slip action
- Hardened spider gears
- Smooth street operation
- Four year replacement program, called D-REX
Gearing and axle matching
Gear ratio and spline count together decide whether a limited slip unit is the right fit for a Dana 44 axle. Higher ratios like 3.92 and up are usually chosen for more torque at low speed, which makes a limited slip valuable on steep grades and loose ground. The spline count has to match the axle shafts exactly, so a mismatch is not a small problem.
Before installing a unit like this, check the carrier, the axle shafts and the pinion setup, and make sure the bearings and seals are in good condition. Ask whether the carrier has been opened before, since prior wear can hide in the case. A cone clutch wears gradually, so a change in engagement or a squeal on turns is worth checking early. Fresh gear oil with a limited slip additive should be used after installation.
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 5420111 |
| UPC | 81499600111 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Axle spline | 19 splines |
| Gear ratio | 3.92 and up |
| Differential type | Limited slip assembly |
| Series | H/P |
| Warranty | 4 year replacement (D-REX program) |
Vehicle fitment
No vehicles are listed, so this differential is matched by axle: a Dana 44 with 19 splines and gears 3.92 and up. Check the axle location and carrier before choosing it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Carrier opening and preload setting are usually handled by a professional with the right tools, so plan accordingly for this H/P Series unit.
What’s included
The limited slip differential assembly, which is the full unit. Compare what arrives against the carrier before the work begins.













