Overview
The Auburn Gear 542082 is a Pro Series Dana 44 limited slip differential with 30 splines, made for 3.92 and up gear ratios. The Pro Series is more aggressive than the standard line while staying streetable. It uses the same preloaded cone clutch system with a higher preload setting.
Key features
- Higher preload rating than the standard line
- Aggressive yet streetable limited slip action
- Same preloaded cone clutch system as the H/P Series
- Four year replacement program, called D-REX
Higher preload and break-in
A higher preload setting makes the clutch engage more firmly, which can feel more direct on the street and changes how the axle responds in tight turns. Because the clutch is more loaded, the break-in period matters, and driving gently at first helps the clutch faces bed in. Gear ratio, tire size and axle wear all change how the unit feels, so consider them when choosing the setup.
Preload affects clutch life, so it should be checked after the first few drives and whenever the carrier is opened. Note any chatter or slip in tight turns and address it before it becomes a larger problem.
- Check preload after the first drives
- Watch for chatter in tight turns
- Inspect axle seals and gear oil level
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542082 |
| UPC | 81499600082 |
| Axle type | Dana 44 |
| Axle location | Front or rear |
| Axle spline | 30 splines |
| Gear ratio | 3.92 and up |
| Differential type | Limited slip assembly |
| Series | Pro Series |
Vehicle fitment
No vehicles are named for this unit, so match it by axle: a Dana 44 with 30 splines and gears 3.92 and up, in front or rear. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Set the preload to the specification given for this Pro Series unit and allow for a break-in period on the street.
What’s included
The limited slip differential assembly is the only item included.













