Overview
The Auburn Gear 5420107 is an H/P series limited slip differential assembly for the GM 12 bolt rear axle, 8.875 inch size, with 30 splines and a 2.76 to 3.42 ratio range.
It is a smooth, streetable limited slip with a preloaded tapered cone type clutch system for on and off road driving. A 4 year replacement D-REX program comes with the assembly.
Key features
- Preloaded tapered cone type clutch system
- Streetable limited slip action for everyday driving and off road use, per the brand
- Complete differential assembly for the GM 12 bolt 8.875 inch rear axle
- 30 spline axle connection
- 4 year replacement D-REX program stated by Auburn Gear
Gear setup and axle match
A GM 12 bolt rear axle with an 8.875 inch housing is a common layout, but spline count and housing width must match exactly before a limited slip is installed. Measure the axle shafts and check the existing carrier, since a near match can still bind or fail. Setup also includes pinion depth and backlash, which a driveline shop should set after installation.
Because a limited slip shares torque, it can change how the vehicle handles on loose surfaces. Driving with a worn clutch can cause chatter or uneven traction, so inspect the unit when tires are rotated or the axle is serviced. Replace gaskets and seals during installation, and use fresh gear oil made for limited slip service.
- Confirm the spline count before ordering
- Have the pinion depth and backlash set by a shop
- Use fresh limited slip gear oil after installation
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 5420107 |
| UPC | 81499600107 |
| Product line | H/P series |
| Axle manufacturer | GM |
| Axle location | Rear |
| Axle type | GM 12 bolt, 8.875 inches |
| Axle spline | 30 splines |
| Differential type | Limited slip assembly |
| Ratio range | 2.76 – 3.42 |
Vehicle fitment
Fit is determined by axle type: a GM 12 bolt rear axle at 8.875 inches with 30 splines.
Only GM 12 bolt 8.875 inch axles with 30 splines match this assembly, so confirm your axle before ordering.
Installation notes
This is a complete assembly, so it replaces the existing unit rather than adding to it. Confirm the axle housing and spline count match before installation, and have a qualified driveline shop perform the work.
What’s included
The assembly is a complete limited slip differential. Check the package contents against your installation before starting.










