Overview
The Auburn Gear 542089 is an H/P Series limited slip differential for Ford 10.25 inch and 10.5 inch rear axles with 35 splines. It has a smooth, streetable design with a preloaded tapered cone clutch system.
It works with all gear ratios and has hardened spider gears.
Key features
- Limited slip assembly for Ford 10.25 inch and 10.5 inch axles
- For use with 35 spline axles
- For use with all ratios
- Preloaded cone style clutch system
- Smooth, quiet street operation
- Hardened spider gears
- 4 year replacement warranty from Auburn Gear
Limited slip break-in and care
A limited slip differential depends on its clutch preload and fluid to work smoothly. New clutch parts need a gentle break-in so the clutches seat evenly, which means avoiding hard launches and long hard turns for the first stretch of driving. The fluid should be a limited slip formula suited to the unit.
Care is simple. Check the fluid level at regular service, watch for leaks at the cover, and listen for chatter on tight turns. Metal in the fluid or a change in noise points to clutch wear or a bearing problem, and that is a good time to have the unit inspected before it gets worse. Ring and pinion pattern should be verified after any gear work.
- Use limited slip additive or formulated fluid
- Inspect the cover gasket for seepage
- Watch for metal particles on the drain plug
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542089 |
| UPC | 81499600089 |
| Series | H/P Series |
| Differential type | Limited slip assembly |
| Axle manufacturer | Ford |
| Axle type | Ford 10.25 inches and Ford 10.5 inches |
| Axle location | Rear |
| Axle spline | 35 splines |
| Gear ratios | All ratios |
| Clutch system | Preloaded cone style |
| Warranty | 4 year replacement warranty |
Vehicle fitment
It fits Ford 10.25 inch and 10.5 inch rear axles with 35 splines, and works with all gear ratios.
Confirm axle size and spline count before ordering, and confirm fit for your vehicle’s year, model and trim.
Installation notes
Set the ring and pinion pattern and backlash before final assembly, torque all fasteners evenly, and use a limited slip fluid or additive suited to the unit. Professional installation is advisable for suspension, steering, brake and axle work. Re-check fasteners and fluid level after the first miles of driving.









