Overview
The Auburn Gear 542090 is a Ford 9.75 inch H/P Series limited slip rear differential assembly with 34 splines. It uses a preloaded tapered cone type clutch system to provide limited slip traction on and off road. It is built around the Ford 9.75 inch rear axle.
Auburn Gear labels this assembly Universal Fit, but it is sized for the Ford 9.75 inch rear axle rather than a specific vehicle. No vehicle years, models or trims are listed, so confirm the axle size and spline count before ordering.
Key features
- Preloaded tapered cone type clutch system for limited slip action
- Designed for smooth, streetable driving on and off road.
- Limited slip assembly for the Ford 9.75 inch rear axle
- 34 splines
- D-REX replacement program, described by Auburn Gear as no questions asked with a 4 year replacement
Ford 9.75 rear axle basics
A limited slip differential on a Ford 9.75 inch rear axle transfers torque to the wheel with grip when the other side slips. The preloaded tapered cone clutch keeps the two sides linked at all times, so the vehicle pulls more evenly on loose gravel, wet pavement and mud. Because the unit is a complete assembly, the carrier, gears and clutch arrive set, and only the axle shafts and housing need matching.
Gear oil matters more with a limited slip than with an open differential. Use the fluid type your vehicle calls for and add a friction modifier when the unit requires it, since the clutch plates depend on the right friction properties. A rear cover that shows leaks or a fluid level that drops quickly should be inspected before the clutch wears further.
- Match axle shaft splines to the 34 count
- Use the correct fluid and friction additive
- Support the vehicle on jack stands before work
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542090 |
| UPC | 81499600090 |
| Series | H/P Series |
| Differential type | Limited slip assembly |
| Axle manufacturer | Ford |
| Axle location | Rear |
| Axle type | Ford 9.75 inches |
| Axle spline | 34 splines |
| Replacement program | D-REX, 4 year replacement |
Vehicle fitment
The unit is sized for the Ford 9.75 inch rear axle with 34 splines and is sold as Universal Fit. Confirm the axle size and spline count against your axle before ordering. Check fit against your vehicle’s year, model and trim before ordering.
Axles of other sizes or spline counts are not covered by this part. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Axle shafts must match the 34 spline count of this assembly. Replacing a rear differential typically involves opening the axle housing and setting the gear mesh, so a professional installer is recommended. Lift the vehicle safely and support it on jack stands before working underneath.
What’s included
The package is a complete limited slip differential assembly. Axle shafts, gaskets and hardware may be needed, so check them against the job before starting.








