Select your vehicle

Auburn Gear Dana 44 30 Spline 3.73 Down Pro Series Limited Slip – 542083

Auburn Gear

Out of stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 19, 2026 9:50 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Auburn Gear Pro Series Dana 44 limited slip, 30 spline, for 3.73 and down gears
  • Higher preload rating than the standard H/P line
  • Aggressive yet streetable limited slip action
  • Four year replacement program (D-REX)

Description

Overview

The Auburn Gear 542083 is a Pro Series Dana 44 limited slip differential with 30 splines, made for 3.73 and down gear ratios. The Pro Series is aggressive yet still streetable. It keeps the preloaded cone clutch system of the H/P line with a much higher preload rating.

Key features

  • Higher preload rating than the standard line
  • Aggressive yet streetable limited slip action
  • Preloaded cone clutch system
  • Four year replacement program, called D-REX

Setup and break-in

A limited slip differential sends torque to the wheel with grip when the other one loses traction, which helps on loose climbs and in snow. A cone clutch unit depends on preload to hold its clutch packs, so the setting matters as much as the gear ratio. Too little preload can cause chatter or slip under load, while too much adds heat and wear to the clutches.

Setup usually goes better when the gears, carrier bearings and pinion seal are inspected before the unit goes in. Many shops replace these parts at the same time during a rebuild, which keeps the axle reliable under the higher clutch load. After the first drives, check for leaks and listen for noise in tight turns.

  • Confirm gear pattern and backlash before final assembly
  • Use a limited slip additive with the fluid change
  • Expect some chatter during early break-in

Specifications

Brand Auburn Gear
Part number 542083
UPC 81499600083
Axle type Dana 44
Axle location Front or rear
Axle spline 30 splines
Gear ratio 3.73 and down
Differential type Limited slip assembly
Series Pro Series

Vehicle fitment

No vehicles are named for this unit, so it is matched by axle: a Dana 44 with 30 splines and gears 3.73 and down. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Set preload carefully, following the setup procedure for this Pro Series unit, and plan on a break-in period before heavy use, since it runs a higher preload.

What’s included

The limited slip differential assembly is the only item included.

Specification

Shipping weight 20.84 lbs
Package dimensions 12.00 × 12.00 × 12.00 in
brands

Questions & Answers

Is the Auburn Gear 542083 for 3.73 and down gears?

Yes. It is built for 3.73 and down gear ratios on Dana 44 axles with 30 splines. Confirm your gear ratio, axle type and vehicle year, model and trim before ordering.

What makes the Pro Series different from the standard Auburn limited slip?

The Pro Series is more aggressive yet still streetable, with a much higher preload rating than the standard H/P line. It uses the same preloaded cone clutch system.

Does this differential come with a replacement program?

Yes. It comes with a four year replacement program, called D-REX. Review the program terms to see what coverage applies.

Can a limited slip differential be serviced on a schedule?

Yes. Change the fluid on a schedule that matches your use, and sooner after heavy off-road driving or deep water crossings. Pair the fluid change with a limited slip additive, since cone clutches depend on friction to hold.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon