Overview
The Auburn Gear 542051 is a Pro Series rear limited slip differential assembly for Chrysler axles, 8.75 inch size, with 30 splines.
The Pro Series is designed to feel firm yet streetable, with a preloaded cone clutch system rated for higher preload. The unit also comes with a 4 year D-REX replacement program.
Key features
- Preloaded cone clutch system with a much higher preload rating
- Firm yet streetable limited slip action.
- 30 spline axle connection
- 8.75 inch Chrysler drop out axle type
- 4 year replacement D-REX program
Drop out axles and fit
Chrysler 8.75 inch axles with a drop out style use a housing shape that is often matched by axle type rather than by vehicle model. Because of that, the housing design, spline count and carrier size should all be measured against the axle you are replacing. A drop out housing that looks similar can still differ in internal dimensions, so take the time to compare.
A Pro Series clutch works hardest under load, such as hard acceleration out of a turn or towing, so the clutch plates and axle shafts see more stress than in light daily driving. Many owners replace the axle seals and bearings at the same time, since the housing is already open. Keep the gear oil fresh, since clutch material wears faster in old or contaminated fluid.
- Measure the drop out housing width
- Count the spline count on both shafts
- Check axle seals and bearings during the job
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542051 |
| UPC | 81499600051 |
| Product line | Pro Series |
| Axle manufacturer | Chrysler |
| Axle location | Rear |
| Axle type | Chrysler 8.75 inch drop out |
| Axle spline | 30 splines |
| Differential type | Limited slip assembly |
Vehicle fitment
This assembly is sold by axle type: a Chrysler rear axle in the 8.75 inch drop out style with 30 splines. Confirm the drop out design against your axle before fitting.
Chrysler axles with a different housing style or spline count do not match this unit. Check fit against your vehicle’s year, model and trim before ordering.
Installation notes
Check the drop out design and spline count against the axle being replaced before installing. A qualified driveline shop should handle the install and final setup.
What’s included
The unit arrives as a complete limited slip differential assembly. Confirm any gaskets, bearings or fasteners you need before starting the install.









