Overview
The Auburn Gear 542074 is an H/P Series limited slip differential for a Chrysler 8.25 inch rear axle with 29 splines. Its preloaded tapered cone clutch provides limited slip action, and the unit is a complete assembly.
Auburn Gear presents the H/P Series as a smooth, streetable choice with its 4 year replacement D-REX program. The spline count and axle size are the main checks before buying.
Key features
- Preloaded tapered cone type clutch system
- H/P Series limited slip design
- Complete limited slip differential assembly
- Chrysler 8.25 inch rear axle with 29 splines
- 4 year replacement D-REX program.
Axle shaft spline checks
Splines are what link the axle shafts to the side gears, so a count that does not match means the shafts will not seat correctly. Mismatched shafts can also wear the new clutch unevenly. Shaft diameter and spline style can look similar between Chrysler 8.25 inch axles, which makes counting the splines directly the most reliable check before buying.
Limited slip units also depend on the carrier and clutch matching the housing, so the full assembly should be measured together rather than one part at a time. Before the install, clean the housing mating surface, inspect the axle seals, and check that the bearings are in good condition. A professional setup and break-in period help the new clutch perform as expected.
- Count splines on both shafts
- Clean the housing mating surface
- Inspect axle seals and bearings during the job
Specifications
| Brand | Auburn Gear |
|---|---|
| Part number | 542074 |
| UPC | 81499600074 |
| Series | H/P Series |
| Differential type | Limited slip assembly |
| Clutch system | Preloaded tapered cone type |
| Axle manufacturer | Chrysler |
| Axle location | Rear |
| Axle type | Chrysler 8.25 inches |
| Axle spline count | 29 splines |
Vehicle fitment
Universal fit is shown, yet the axle is a Chrysler 8.25 inch rear unit with 29 splines and no vehicle years, models or trims are given. Confirm both specs match your axle.
The 27 spline Chrysler 8.25 inch H/P unit (542072) is a separate part number. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
As a complete differential, this unit replaces the existing rear assembly. Count the 29 splines on your axle shafts before purchase, and plan for a professional setup and a break-in period.
What’s included
Only the complete differential assembly comes with this unit. Check your installation kit against the job before you start, including any seals you need.










