Overview
The Artec Industries HS6010D is an Ultimate Dana 60 high steer arm for crossover steering and full hydraulic steering builds. Instead of the factory kingpin springs, it uses a springless knuckle design in which a set screw adjusts the torque that holds the knuckle together. The arm’s design also lets you choose how and where the steering links attach.
The arm is made for the Dana 60 axle and knuckle, so confirm your axle type before ordering. Check the space between the arm and your wheels and tires before buying.
Key features
- Springless knuckle design sets the knuckle torque with a set screw, not factory kingpin springs.
- Designed to reduce the slop common in axles that take moderate off-road abuse.
- Arm layout lets you set both the attachment point and the location of the steering links.
- Works with the optional Knuckle Bolt Kit, which is sold separately, to add knuckle and steering strength.
- Confirmed for 17-inch wheels with 4.75-inch backspacing.
- Wheels with extremely large backspacing should not be used with this arm.
Steering geometry and high steer
A high steer arm changes where the steering links attach, which alters steering geometry and the way the knuckle loads. Moving the attachment point affects steering effort, toe change and the forces on the tie rod, so the link layout should be planned with the rest of the steering system.
Knuckle and kingpin wear become more important once the steering is changed. Inspect the bushings, the kingpin area and the tie rod ends regularly, and check the steering for play after any hard off-road use. Loose or worn parts can allow slop that a high steer setup can make worse.
- Plan the tie rod and drag link layout before mounting
- Inspect kingpin and knuckle bushings regularly
- Check for play after hard off-road use
- Recheck toe and alignment after any steering change
Specifications
| Brand | Artec Industries |
|---|---|
| Part number | HS6010D |
| UPC | 816791021212 |
| Axle type | Dana 60 |
| Set screw | 3/4 inch |
| Load washer thickness | .250 inch |
| Bulge measurement | 1.25 inch from the spindle mounting surface |
| Confirmed wheels | 17-inch, 4.75-inch backspacing |
| Not included | Studs and nuts |
Vehicle fitment
No vehicle list is given for this high steer arm. It is a Dana 60 axle part, so it is not a universal fit; confirm the axle and knuckle type before ordering.
Factory H1 backspaced wheels will not work with this arm. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Each arm uses the 3/4 inch set screw, jam nut, grease zerk, .250 inch thick load washer and upper kingpin bushing from the springless conversion kit. Check clearance between the arm and the wheels and tires before final assembly, and have the steering set up by a qualified shop.
What’s included
Springless conversion hardware for each arm: a 3/4 inch set screw, jam nut, grease zerk, .250 inch thick load washer and upper kingpin bushing.
Not included: Studs and nuts, and the Knuckle Bolt Kit, which are sold separately.














