Select your vehicle

Artec JK 1 Ton – Front Dana 60 Swap Kit with Daystar Bushings – JK6011

Artec Industries

Shop Jeep Wrangler JK Axle Upgrade Kits on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front Dana 60 swap truss and bracket kit for 2007–2016 Jeep Wrangler JK
  • 1/4 in. thick mild steel truss with interlocked 1/4 in. gussets
  • Brackets for control arms, shocks, anti-sway bar, track bar and coil springs
  • Track bar mount with four locations for lifted vehicles

Description

Overview

The Artec Industries JK6011 is a front Dana 60 swap kit for 2007–2016 Jeep Wrangler (JK) 2-door and 4-door models. It is a truss and bracket system that reinforces the axle and carries the factory link, spring, anti-sway bar and shock locations, built from 1/4 in. thick mild steel.

The brackets are jigged into the truss, so they set their own position once the truss is assembled, which saves installation time. The kit includes the upper and lower control arm mounts, shock mounts, anti-sway bar mounts, track bar mount and coil spring mounts, with interlocked 1/4 in. gussets reinforcing the truss.

Key features

  • 1/4 in. thick mild steel truss and brackets
  • Interlocked 1/4 in. gussets reinforce the truss
  • Brackets for upper and lower control arms, shocks, anti-sway bar, track bar and coil springs
  • Track bar mount with four locations for aftermarket lifts
  • Link brackets jigged into the truss for set positions
  • Design can be updated for future link geometry changes

Steering and suspension geometry

A Dana 60 is a heavier front axle, so the steering and suspension load changes once the swap is done. The track bar, drag link, tie rods and ball joints all see more stress, so inspect them before the install and replace any that are worn. The truss adds strength to the housing, but it does not replace sound steering parts.

Set the geometry with care once the axle is in. Check caster, toe and track bar position after the install, and confirm there is no rubbing at full steering lock. Bump stops and driveline angles also need a look, since the higher track bar and axle location can change how the suspension travels.

  • Inspect tie rods, drag link and ball joints before the swap
  • Check caster and toe after the install
  • Look for rubbing at full steering lock
  • Review bump stops and driveline angles

Specifications

Brand Artec Industries
Part number JK6011
UPC 816791021854
Axle Front Dana 60
Truss and brackets 1/4 in. thick mild steel
Axle origin Ford 3/4 and 1 ton trucks, model years 85–91.5 kingpin and 92–97 ball joint
Axle tube check 3.0 in. driver side, 24.5 in. passenger side
Wheel bolt pattern Dana 60 does not match the JK 5-lug pattern

Vehicle fitment

The fitment covers the 2007–2016 Jeep Wrangler (JK) in 2-door and 4-door models, across the 70th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims and the Unlimited versions of each.

The Dana 60 this kit is designed for comes from Ford 3/4 and 1 ton trucks, with model years 85–91.5 (kingpin) and 92–97 (ball joint). Dana 44 axles were also used in those years, so confirm the axle is a Dana 60 before fitting.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Check the axle first: it should have 3.0 in. of driver side axle tube and 24.5 in. of passenger side axle tube. Older axles with different differential offsets are not covered.

Tack weld the truss together, place it on the axle, then fit the brackets, which sit in place once the truss is set.

Dana 60 axles do not match the factory JK 5-lug wheel bolt pattern, so new wheels will need to be purchased for this swap.

The lower control arm brackets are wider than factory because of the larger Dana 60 casting, so the lower control arms may need modification. Adjustable arms with flexible joints may not need modification. The upper control arm brackets sit slightly higher than factory, so adjustable arms may be needed there.

The track bar bracket sits higher than stock to give proper steering geometry, so bumpstop extensions and a new track bar will likely be needed. A kingpin axle is recommended so high steer arms can be used.

Brake and steering components are not included in this kit.

What’s included

The truss, the brackets for the control arms, shocks, anti-sway bar, track bar and coil springs, and the mounts for each. The title also names Daystar bushings.

Not included: Brake and steering components, and new wheels for the Dana 60 bolt pattern.

SKU: A/IJK6011 Category:

Specification

Shipping weight 49.00 lbs
Package dimensions 48.00 × 7.00 × 7.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201670th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Artec JK6011 fit a 2007 to 2016 Jeep Wrangler JK?

Yes. The fitment includes 2007–2016 Jeep Wrangler (JK) 2-door and 4-door models in the trims shown. Confirm your trim before ordering, since the kit is built for the JK front axle.

Which Dana 60 axles does this kit use?

The front Dana 60 comes from Ford 3/4 and 1 ton trucks, model years 85 to 91.5 (kingpin) and 92 to 97 (ball joint). The axle should have 3.0 in. of driver side tube and 24.5 in. of passenger side tube.

Do I need new wheels for this swap?

Yes. Dana 60 axles do not match the factory JK 5-lug wheel bolt pattern, so new wheels will need to be purchased. Check the bolt pattern on any wheels you already have before fitting the kit.

Do steering and brake parts need upgrading with a Dana 60 swap?

Often they do. A heavier front axle puts more load on the steering and brakes, so inspect tie rods, the drag link, ball joints and brake hardware for wear before the swap. Upgrades suited to the heavier axle can be considered at the same time.

How should the truss be checked after fitting?

Check the welds for cracks after the first drives, confirm the alignment is right and make sure all control arm and track bar bolts are tight. Look for rubbing between the tires and frame at full steering lock.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Jeep Wrangler JK Axle Upgrade Kits on Amazon