Overview
The Artec TJ3010 is a pair of inner C gussets for front Dana 30 or Rubicon Dana 44 inner C assemblies. Artec cut and formed them from 1/4 inch mild steel to reinforce the inner C. Removing the upper ball joint before welding is recommended. Installation requires welding and general fabrication.
Key features
- Made from 1/4 inch mild steel
- Precision cut and formed components
- Works with Dana 30 or Rubicon Dana 44 inner C
- Sold as a pair
Welding a C gusset safely
An inner C gusset adds stiffness where the axle housing meets the frame, which helps the front end resist flex under load. Because the gusset is welded directly to the structure, the fit and weld quality matter more than the bolt-on parts. Mark the position and dry-fit the pieces before committing to any weld.
Heat can distort thin stock, so tack the gussets in several places and let the metal cool between passes. Clean the mating surfaces to bare metal for a sound weld, and check that the steering and brake lines clear the new steel. If the inner C shows cracks, repair or replace it before adding gussets, since reinforcing a damaged part will not restore its strength.
- Dry-fit the gussets before the final welds
- Clean mating surfaces to bare metal
- Check clearance for brake and steering lines
Specifications
| Brand | Artec Industries |
|---|---|
| UPC | 816791024275 |
| Material | Mild steel |
| Thickness | 1/4 inch |
| Axle | Dana 30 or Rubicon Dana 44 |
| Quantity | Pair |
Vehicle fitment
No year range or vehicle model applies to these gussets. The application is the front Dana 30 or Rubicon Dana 44 inner C.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the upper ball joint before welding, and check the fit before the final welds.
What’s included
The gussets are sold as a pair.
Not included: Welding equipment and the fabrication work needed for installation.












