Overview
The Artec JK4405 is a pair of inner C gussets for the front Dana 30 or Dana 44 axle, made for 2 and 4-door models. They reinforce a weak area of the inner C with 1/4 inch mild steel and are built for heavy duty use. Installation requires welding and general fabrication.
Key features
- Made from 1/4 inch mild steel
- Reinforces the inner C area
- Works with Dana 30 or Dana 44 axles
- Sold as a pair
Why inner C gussets matter
The inner C is a stress point on a front axle housing, and it can flex under heavy loads, especially when the tires are large or the vehicle is driven hard off road. Gussets add material where the metal is thin, which helps the housing resist that bending. They work best when the axle is sound to begin with, so look the housing over for cracks before any fabrication work starts.
Because gussets are welded, the work should be planned around the rest of the front end. Remove the parts that get in the way of the weld area, and keep the axle clean to bare steel at each joint. Re-check the alignment of the axle and control arms after the install, since welding can pull metal slightly.
- Inspect the inner C and welds for existing cracks first
- Clean the weld area to bare metal
- Check fit before the final welds
- Re-check axle alignment after installation
Specifications
| Brand | Artec Industries |
|---|---|
| UPC | 816791021724 |
| Material | Mild steel |
| Thickness | 1/4 inch |
| Axle | Dana 30 or Dana 44 |
| Quantity | Pair |
Vehicle fitment
It fits 2 and 4-door JK models with a front Dana 30 or Dana 44 axle. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These gussets are not bolt-on and need welding. Check the fit before final welds, and wear proper eye and face protection while welding.
What’s included
The gussets are sold as a pair.
Not included: Welding equipment and the fabrication work needed to install the gussets.









